Electronic Control Module (Engine) - Remove and Install
拆卸步骤
- 从箱体 (3) 的两侧拆下螺栓 (1) 。 拆下盖 (2) 。
Show/hide table
 | |
| 图 1 | g01522787 |
- 断开线束组件 (6) 和 (7) 。 卸下螺栓 (4) 。 拆下电子控制模块 (5) 。
Show/hide table
 | |
| 图 2 | g01522788 |
安装步骤
- 安置电子控制模块 (5) 。 安装螺栓 (4) 。 连接线束组件 (6) 和 (7) 。 将线束组件 (6) 和 (7) 的接头拧紧至扭矩为 6 ± 1 N·m (53 ± 9 lb in)。
Show/hide table
| | |
| 图 3 | g01522788 |
- 将盖 (2) 安装到箱体 (3) 上。 将螺栓 (1) 安装在箱体 (3) 的两侧。
Show/hide table
| | |
| 图 4 | g01522787 |
Caterpillar Information System:
C175 Generator Set Engines Water Temperature Control Valve - Install
C7 Engines for Caterpillar Built Machines Flywheel
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Oil Filter (Transmission)
C15 and C18 Engines for Caterpillar Built Machines Piston Cooling Jet
C7 Petroleum Engines Water Lines
CX31 On-Highway Transmission Modulating Valve
C7 Petroleum Engines Engine Oil Lines
TH31 Well Servicing Transmissions Bypass Valve - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Assemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Disassemble
C7 Petroleum Engines Exhaust Elbow
C7 Petroleum Engines Exhaust Elbow
TH48-E80 Petroleum Transmission General Information
TH31 Well Servicing Transmissions Modulating Valve (Transmission Clutch) - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Remove
C11 and C13 Engines Water Pump
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Install
TH31 Well Servicing Transmissions Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Control Valve (Counterweight Circuit) - Install
Removal and Installation of the 126-1774 Endbell Cover {7553} Removal and Installation of the 126-1774 Endbell Cover {7553}
3500 Engines Turbocharger
C27 and C32 Generator Set Engines Can Not Reach Top Engine RPM
C27 and C32 Generator Set Engines Engine Will Not Crank
C27 and C32 Generator Set Engines Intermittent Low Power or Power Cutout