Piston Cooling Jet
Show/hide table
 | |
| 图 1 | g02991456 |
Show/hide table
| 276-4637 喷油管组件 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | - | - | 拧紧螺栓至扭矩为 40 ± 8 N·m (30 ± 6 lb ft)。 |
Show/hide table
 | |
| 图 2 | g02991457 |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
| 2 | - | - | 喷油管组件的直径为 1.83 mm (0.072 in)。 |
| - | - | - | 使用压缩空气检查喷油管组件有无堵塞。 |
| - | - | - | 肉眼检查喷油管组件有无损坏或变形。 如果有任何损坏或变形，更换喷油管组件。 |
| - | - | - | 注：喷油管组件的正确方向对确保活塞的正确冷却和润滑至关重要。 当从发动机上拆下喷油管组件时，务必以不会损坏喷嘴的方式处理喷油管组件。 |
Show/hide table
 | |
| 图 3 | g02991458 |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
| - | - | - | 尺寸 (A) 为 53.27 ± 0.25 mm (2.097 ± 0.010 in)。 |
| 尺寸 (B) 为 3.15 ± 0.25 mm (0.124 ± 0.0010 in)。 |
|||
| 尺寸 (C) 为 63.37 ± 0.25 mm (2.495 ± 0.010 in)。 |
|||
| 尺寸 (D) 为 250.00 ± 0.25 mm (9.842 ± 0.010 in)。 |
Caterpillar Information System:
C7 Petroleum Engines Water Lines
CX31 On-Highway Transmission Modulating Valve
C7 Petroleum Engines Engine Oil Lines
TH31 Well Servicing Transmissions Bypass Valve - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Assemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Disassemble
C7 Petroleum Engines Exhaust Elbow
C7 Petroleum Engines Exhaust Elbow
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Remove
C27 and C32 Engines for Caterpillar Built Machines CID 0190 FMI 08 Engine Speed signal abnormal
C27 and C32 Generator Set Engines System Configuration Parameters
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Oil Filter (Transmission)
C7 Engines for Caterpillar Built Machines Flywheel
C175 Generator Set Engines Water Temperature Control Valve - Install
C175 Generator Set Engines Electronic Control Module (Engine) - Remove and Install
TH48-E80 Petroleum Transmission General Information
TH31 Well Servicing Transmissions Modulating Valve (Transmission Clutch) - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Remove
C11 and C13 Engines Water Pump
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Install
TH31 Well Servicing Transmissions Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Control Valve (Counterweight Circuit) - Install
Removal and Installation of the 126-1774 Endbell Cover {7553} Removal and Installation of the 126-1774 Endbell Cover {7553}