CX31 On-Highway Transmission Caterpillar


Modulating Valve

Usage:

CX31 B3X


图 1g03385330

表 1
技术规格,用于 244-7772 调制阀总成 
项目  数量  零件  技术规格说明 
将蓝色 185-3996 螺纹锁固胶涂抹在阀芯组件的外螺纹上。 
218-2373 螺母  拧紧至扭矩为 13.0 ± 1.5 N·m (115.1 ± 13.3 lb in)。 
6V-3965 接头  拧紧至扭矩为 14 ± 4 N·m (124 ± 35 lb in)。 
118-3731 弹簧  测试力下的长度为 14.00 mm (0.551 inch)
测试力为 36.0 ± 1.8 N (8.1 ± 0.4 lb)
测试后的自由长度为 15.99 mm (0.630 inch)。 
工作电压为 12 VDC。
25° C (77 °F) 下的电阻为 2.2 ± 0.2 欧姆。
温度范围为 −40° ± 121° C (−40° ± 250° F)
121° C (250° F) 下的最大电流为 2 安培。 

Caterpillar Information System:

C7 Petroleum Engines Engine Oil Lines
TH31 Well Servicing Transmissions Bypass Valve - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Assemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Disassemble
C7 Petroleum Engines Exhaust Elbow
C7 Petroleum Engines Exhaust Elbow
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Remove
C27 and C32 Engines for Caterpillar Built Machines CID 0190 FMI 08 Engine Speed signal abnormal
C27 and C32 Generator Set Engines System Configuration Parameters
C27 and C32 Generator Set Engines E197 High Engine Oil Temperature
C175 Generator Set Engines Water Temperature Control Valve - Remove
C7 Petroleum Engines Water Lines
C15 and C18 Engines for Caterpillar Built Machines Piston Cooling Jet
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Oil Filter (Transmission)
C7 Engines for Caterpillar Built Machines Flywheel
C175 Generator Set Engines Water Temperature Control Valve - Install
C175 Generator Set Engines Electronic Control Module (Engine) - Remove and Install
TH48-E80 Petroleum Transmission General Information
TH31 Well Servicing Transmissions Modulating Valve (Transmission Clutch) - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Remove
C11 and C13 Engines Water Pump
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Install
TH31 Well Servicing Transmissions Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.