Rocker Shaft - Assemble
组装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-0510 | 冲头总成 | 1 |
- 安装调整螺钉 (4) 和螺母 (3) 。
注: 不要重复使用调整螺钉 (4) 。
Show/hide table
 | |
| 图 1 | g01846480 |
- 使用工具 (A) 将衬套 (6) 安装到摇臂 (2) 和 (8) 中。 确保衬套 (6) 上的机油孔与摇臂 (2) 和 (8) 上的机油孔对齐。 机油孔必须定位在正确位置。
- 在轴 (5) 上安装摇臂 (2) 和 (8) 。 将摇臂 (2) 和 (8) 以及轴 (5) 安置到支架组件 (7) 上。
- 确保摇臂组件 (1) 正确定位以防损坏。
Show/hide table
 | |
| 图 2 | g01846479 |
End By: 安装摇臂轴。 请参阅 拆解和组装, "摇臂轴和推杆 - 安装"。
Caterpillar Information System:
C175-16 and C175-20 Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
C6.6 Engines for Caterpillar Built Machines Electrical System
C7.1 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
C6.6 Engines for Caterpillar Built Machines Air in Fuel - Test
C7.1 Engines for Caterpillar Built Machines Gear Group (Front) - Time
2007/02/26 Improved Wiring Schematics for the Governor Control {1264, 7566}
C32 Petroleum Engines Exhaust Manifold - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Separate
3500B Engines Turbocharger - Install - Rear Mounted Turbocharger
C32 Petroleum Engines Fuel Transfer Pump - Install
C32 Petroleum Engines Fuel Transfer Pump - Remove
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
C175 Generator Set Engines Crankshaft Rear Seal - Remove
C32 Petroleum Engines Engine Oil Filter Base - Remove
3406C Engines for Caterpillar Built Machines Engine Oil Filter Base
C32 Petroleum Engines Engine Oil Filter Base - Install
C175 Generator Set Engines Crankshaft Rear Seal - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Counterbalance Valve (Travel) - Disassemble
C15 Generator Set Engines Cat Data Link Circuit - Test
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Counterbalance Valve (Travel) - Assemble
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track Carrier Roller - Remove
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil and Water Pump Drive - Remove
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track Carrier Roller - Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil and Water Pump Drive - Disassemble