Fuel Transfer Pump - Remove
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn the fuel supply to the “OFF” position.
Show/hide table
Illustration 1 g01199999 - Disconnect tube assembly (4) and hose assembly (5).
- Remove bolts (2) and washers (1).
- Remove fuel transfer pump (3) and the O-ring seal.
Caterpillar Information System:
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
3500B Engines Turbocharger - Remove - Rear Mounted Turbocharger
C32 Petroleum Engines Fuel Filter Base - Assemble
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
G3500 Engines Turbocharger
C32 Petroleum Engines Fuel Filter Base - Disassemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C32 Petroleum Engines Fuel Filter Base - Install
C32 Petroleum Engines Fuel Filter Base - Remove
G3500 Engines Manual Stop Procedure
2005/09/01 New Software is Now Used {7620}
C9-XQ300 Rental Generator Set Additional Messages
C32 Petroleum Engines Fuel Transfer Pump - Install
3500B Engines Turbocharger - Install - Rear Mounted Turbocharger
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Separate
C32 Petroleum Engines Exhaust Manifold - Remove and Install
2007/02/26 Improved Wiring Schematics for the Governor Control {1264, 7566}
C7.1 Engines for Caterpillar Built Machines Gear Group (Front) - Time
C6.6 Engines for Caterpillar Built Machines Air in Fuel - Test
C7.1 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
C6.6 Engines for Caterpillar Built Machines Electrical System
C175-16 and C175-20 Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C175 Generator Set Engines Crankshaft Rear Seal - Remove