Fuel Filter Base - Assemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 155-0695 | Thread Lock Compound | - |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the O-ring seals on fuel bypass valves (2) and (3). Install the fuel bypass valve in fuel filter base assembly (1).
- If necessary, install hollow stud (4) to fuel filter base assembly (1). Tighten the hollow stud to a torque of
70 ± 15 N·m (52 ± 11 lb ft) .Apply Tooling (A) to the first
7.6 ± 0.8 mm (0.30 ± 0.03 inch) of threads at the base end of the taperlock stud. - If necessary, install shield (4) to fuel filter base assembly (1).
Show/hide table
Illustration 1 | g01199906 |
End By:
- Install the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base - Install".
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
G3500 Engines Turbocharger
C32 Petroleum Engines Fuel Filter Base - Disassemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C32 Petroleum Engines Fuel Filter Base - Install
C32 Petroleum Engines Fuel Filter Base - Remove
G3500 Engines Manual Stop Procedure
2005/09/01 New Software is Now Used {7620}
C9-XQ300 Rental Generator Set Additional Messages
C15 Generator Set Engines Electrical Power Supply Circuit - Test
C15 Petroleum Generator Set Engines Speed Sensor
C175 Generator Set Engines Engine Oil Cooler - Install
3500B Engines Turbocharger - Remove - Rear Mounted Turbocharger
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
C32 Petroleum Engines Fuel Transfer Pump - Remove
C32 Petroleum Engines Fuel Transfer Pump - Install
3500B Engines Turbocharger - Install - Rear Mounted Turbocharger
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Separate
C32 Petroleum Engines Exhaust Manifold - Remove and Install
2007/02/26 Improved Wiring Schematics for the Governor Control {1264, 7566}
C7.1 Engines for Caterpillar Built Machines Gear Group (Front) - Time
C6.6 Engines for Caterpillar Built Machines Air in Fuel - Test
C7.1 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
C6.6 Engines for Caterpillar Built Machines Electrical System