C32 Petroleum Engines Caterpillar


Fuel Transfer Pump - Install

Usage:

C32 B2C

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01199999

  1. Install the O-ring seal on fuel transfer pump (3). Lubricate the O-ring seal with clean engine oil.

  2. Position fuel transfer pump (3) on the engine. Install bolts (2) and washers (1).

  3. Connect tube assembly (4) and hose assembly (5).

  4. Turn the fuel supply to the “ON” position.

Caterpillar Information System:

C32 Petroleum Engines Fuel Transfer Pump - Remove
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
3500B Engines Turbocharger - Remove - Rear Mounted Turbocharger
C32 Petroleum Engines Fuel Filter Base - Assemble
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
G3500 Engines Turbocharger
C32 Petroleum Engines Fuel Filter Base - Disassemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C32 Petroleum Engines Fuel Filter Base - Install
C32 Petroleum Engines Fuel Filter Base - Remove
G3500 Engines Manual Stop Procedure
2005/09/01 New Software is Now Used {7620}
3500B Engines Turbocharger - Install - Rear Mounted Turbocharger
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Upper Frame and Undercarriage Frame - Separate
C32 Petroleum Engines Exhaust Manifold - Remove and Install
2007/02/26 Improved Wiring Schematics for the Governor Control {1264, 7566}
C7.1 Engines for Caterpillar Built Machines Gear Group (Front) - Time
C6.6 Engines for Caterpillar Built Machines Air in Fuel - Test
C7.1 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
C6.6 Engines for Caterpillar Built Machines Electrical System
C175-16 and C175-20 Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
C175-16 and C175-20 Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C175 Generator Set Engines Crankshaft Rear Seal - Remove
C32 Petroleum Engines Engine Oil Filter Base - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.