Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate
- 将 Caterpillar 电子技师(ET)通过接头 (1) 连接到机器上。 使用表 1 内列出的工具。
Show/hide table
表 1 所需工具     零件号     说明     数量     139-4166     数据链路电缆     1     7X-1425     电缆     1     4C-6805     适配器     1     171-4400     通信适配器工具     1     参考关于使用 Caterpillar 电子技师(ET)的更多信息,请参阅所维修机器的故障诊断与排除、测试和调整, "利用 Caterpillar 电子技师确定诊断代码"。
Show/hide table
图 1 | g01059920 |
右侧仪表板 (1) 诊断接头 |
- 将钥匙起动开关转到接通位置。
- 打开 ET 的软件程序。
- 从 "ECM Selector(ECM 选择器)"屏幕上选择"变速箱 992G" 后单击 "OK" 按钮。
Show/hide table
图 2 | g01060534 |
- 从屏幕顶部的工具栏中选择 "Service(维修)"菜单。
Show/hide table
图 3 | g01059872 |
- 从 "Service(维修)"菜单中选择 "Calibrations(校准)"。
- 从 "Calibrations(校准)"菜单选择 "Torque Converter Pedal Calibration(变矩器踏板校准)"。
- 选择 "Next(下一步)"按钮开始校准。 对号按钮将出现在完成步骤的左侧,且下一步将以粗体字突出显示。 一步成功完成后,可能需要通过选择 "Next(下一步)"按钮开始下一步。 执行屏幕底部列出的步骤,直到校准程序完成。
注: 当前需要执行的步骤将以粗体字突出显示。 所有其他步骤将以灰体字显示。
Show/hide table
图 4 | g01059869 |
- 校准完成时,ET 将显示状态屏幕。 状态屏幕将通知您校准是否成功。 如果校准未成功,ET 将显示失败的原因。 选择 "Restart(重新开始)"按钮重新校准,或者按 "Finish(完成)"按钮退出状态屏幕。
注: 校准成功时,变速箱(ECM)将保存新校准数据。
Show/hide table
图 5 | g01060545 |
- 将钥匙起动开关转到 OFF(关闭)位置。 将维修工具从机器上拆下。
Caterpillar Information System:
992G Wheel Loader and 854G Wheel Dozer Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Electronic Technician) - Calibrate
992G Wheel Loader and 854G Wheel Dozer Power Train Impeller Clutch of the Torque Converter (Electronic Technician) - Calibrate
D10R Track-Type Tractor Seat
854G Wheel Dozer Hydraulic System Main Control Valve
D10R Track-Type Tractor Daily Inspection
2004/04/12 An Updated Lines Group Improves Reliability In Certain Conditions {5057, 6203}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Steering Frame Lock - Separate and Connect
2004/03/22 A New Rear Cluster Idler Gear is Available {1204}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Bank Valve - Assemble
2004/03/22 A New Retainer Plate For The Final Drive Bearing And Thrust Washer Improves The Service Life {4050}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Bank Valve - Disassemble
D5N and D6N Track-Type Tractors AccuGrade Laser Startup (Dual Mast System)
Product Link PL-102C System Installation{7606} Product Link PL-102C System Installation{7606}
2004/05/10 New Test ECM Available for Machines {0785, 7610}
AD45B Underground Articulated Truck Power Train Output Transfer Gears - Disassemble
AD45B Underground Articulated Truck Power Train Output Transfer Gears - Assemble
902, 906 and 908 Compact Wheel Loaders Maintenance Interval Schedule - 902 Compact Wheel Loaders
2004/03/22 New Thrust Discs Improve the Service Life of the Planetary Carriers and the Planetary Gear Mills {3030}
902, 906 and 908 Compact Wheel Loaders Maintenance Interval Schedule - 906 and 908 Compact Wheel Loaders
SCJ and 8SC Series Alternators Capacitor - Test
906 and 908 Wheel Loaders Hydraulic and Steering System Fan and Coupler Hydraulic System
SCJ and 8SC Series Alternators Field Winding - Test
SCJ and 8SC Series Alternators Stator - Test
Installation of New Operator Control Joysticks{4122} Installation of New Operator Control Joysticks{4122}