826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Caterpillar

Connection Procedure

Show/hide table

Personal injury or death can result from machine articulation or movement. Machine frames can move and a person can be crushed. Connect the steering frame lock link between the front and rear frames before working on machine. Secure clevis pin with locking pin. Before operating the machine, fasten the steering frame lock link into the stored position and secure the clevis pin with locking pin. Failure to lock into the stored position before operating can result in loss of steering.

1. Move the machine to a hard, level surface.

2. Engage the parking brake.
   Show/hide table

   Illustration 1	g01079767
   824G Wheel Tractor

   Show/hide table

   Illustration 2	g01079769
   825G Landfill Compactor

   Show/hide table

   Illustration 3	g01079828
   826G Landfill Compactor

   Note: On the 826G Landfill Compactor, store the steering frame lock link on the frame near the rear wheel drum. Install the pins and the lock pins, as shown.

3. Remove the steering frame lock from the storage position on the machine.

4. Slide the steering frame lock into the rear frame. Align the bores in the lock with the bores in the front and rear frames. Install pins (1) and (2). Install locking pins (3) in pins (1) and (2).

Separation Procedure

Show/hide table

Personal injury or death can result from machine articulation or movement. Machine frames can move and a person can be crushed. Connect the steering frame lock link between the front and rear frames before working on machine. Secure clevis pin with locking pin. Before operating the machine, fasten the steering frame lock link into the stored position and secure the clevis pin with locking pin. Failure to lock into the stored position before operating can result in loss of steering.

Show/hide table

Illustration 4	g01079767
824G Wheel Tractor

Show/hide table

Illustration 5	g01079769
825G Landfill Compactor

Show/hide table

Illustration 6	g01079828
826G Landfill Compactor

1. Remove locking pins (3) from pins (1) and (2). Remove pins (1) and (2).

   Note: On the 826G Landfill Compactor, store the steering frame lock link on the frame near the rear wheel drum. Install the pins and lock pins, as shown. Refer to Illustration 6.

2. Slide the steering frame lock link into the storage position in the rear frame, and install the pins and lock pins.