Bank Valve - Disassemble
拆解步骤
开始:
- 拆下油箱阀。 请参考拆解和装配, "阀组 - 拆卸"。
- 将识别标记标置于阀组的所有部件上,以便于组装。
- 拆下螺母 (1) 。
Show/hide table
图 1 | g00494073 |
Show/hide table
图 2 | g00494075 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下连杆 (2) 。 分离独立阀。
- 将弹簧 (3) 、阀 (4) 和 O 形密封圈 (5) 从每个阀上拆下。
Show/hide table
图 3 | g01060231 |
Show/hide table
图 4 | g00494077 |
- 拆下螺栓 (8) 。 拆下端盖 (7) 。
Show/hide table
图 5 | g00494078 |
Show/hide table
图 6 | g00494100 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下滑阀 (6) 。
- 拆下 O 形密封圈 (9) 、弹簧 (10) 和弹簧座 (11) 。
- 拆下安全阀 (12) 。
Show/hide table
图 7 | g00494103 |
- 将盖 (16) 、螺母 (14) ,以及 O 形密封圈 (13) 和 (15) 从安全阀 (12) 上拆下。
Show/hide table
图 8 | g00494104 |
- 将杆 (17) 从安全阀 (12) 上拆下。
Show/hide table
图 9 | g00494105 |
- 将座 (18) 和弹簧 (19) 从杆 (17) 上拆下。
Show/hide table
图 10 | g00494107 |
Show/hide table
图 11 | g01060238 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将 O 形密封圈 (22) 、O 形密封圈 (20) 和备用环 (21) 从杆 (17) 上拆下。
- 将滑阀 (23) 、柱塞 (24) 和弹簧 (25) 从座 (18) 上拆下。 将 O 形密封圈 (27) 和备用环 (26) 从滑阀 (23) 上拆下。
Show/hide table
图 12 | g01060239 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将调整螺钉 (30) 、弹簧 (29) 和座 (28) 从杆 (17) 上拆下。
Show/hide table
图 13 | g01060240 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 对阀 (31) 和 (32) 进行步骤 5 至 14。 对于阀 (33) ,请参考下列步骤。
Show/hide table
图 14 | g00494111 |
- 将螺栓 (35) 和端盖 (34) 从阀 (33) 上拆下。
Show/hide table
图 15 | g00494112 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将 O 形密封圈 (36) 、护圈 (37) 、弹簧座 (38) 、弹簧 (39) 和 O 形密封圈 (40) 从端盖 (34) 上拆下。
Show/hide table
图 16 | g00494113 |
- 将螺栓 (43) 、端盖 (42) 和 O 形密封圈 (41) 从阀 (33) 上拆下。
Show/hide table
图 17 | g00494114 |
- 用螺丝起子固定滑阀 (45) 。 拆下螺栓 (44) 。
Show/hide table
图 18 | g00494115 |
Show/hide table
图 19 | g00494117 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将弹簧座 (46) 、弹簧 (47) 和隔套 (48) 从阀 (33) 上拆下。
- 将护圈 (49) 和 O 形密封圈 (50) 从阀 (33) 上拆下。 将备用环 (51) 从滑阀 (45) 上拆下。 拆下滑阀 (45) 。
Show/hide table
图 20 | g00494118 |
- 将单向阀 (52) 从阀 (33) 上拆下。
Show/hide table
图 21 | g00494119 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将提升阀 (53) 和弹簧 (54) 从阀 (33) 上拆下。 将 O 形密封圈 (56) 和备用环 (55) 从提升阀 (53) 上拆下。 将 O 形密封圈 (57) 从单向阀 (52) 上拆下。
Show/hide table
图 22 | g01060245 |
- 将安全阀 (58) 从入口壳体 (59) 上拆下。
Show/hide table
图 23 | g01060356 |
- 将 O 形密封圈 (60) 从安全阀 (58) 上拆下。 将杆 (61) 从安全阀 (58) 上拆下。
Show/hide table
图 24 | g01060246 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将座 (63) 和弹簧 (62) 从杆 (61) 上拆下。
- 将滑阀 (64) 、柱塞 (65) 和弹簧 (66) 从座 (61) 上拆下。 将 O 形密封圈 (68) 和备用环 (67) 从滑阀 (61) 上拆下。
Show/hide table
图 25 | g01060257 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将盖 (70) 、螺母 (69) ,以及 O 形密封圈 (74) 和 (75) 从杆 (63) 上拆下。 将 O 形密封圈 (73) 、O 形密封圈 (71) 和备用环 (72) 从杆 (63) 上拆下。
Show/hide table
图 26 | g01060256 |
Show/hide table
图 27 | g01060378 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将调整螺钉 (78) 、弹簧 (77) 和座 (76) 从杆 (63) 上拆下。
Caterpillar Information System:
D5N and D6N Track-Type Tractors AccuGrade Laser Startup (Dual Mast System)
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Hydraulic System Pressure - Release
AD30 Underground Articulated Truck Output Transfer Gears - Disassemble
D10R Track-Type Tractor Emissions Certification Film
SCJ and 8SC Series Alternators Charging System
906 and 908 Wheel Loaders Hydraulic and Steering System Steering System
SCJ and 8SC Series Alternators Service Tools
844H Wheel Dozer Tilt Cylinder Bearings - Lubricate
D5N and D6N Track-Type Tractors AccuGrade Laser Startup (Single Mast System)
C-12 Generator Set Engine CID 0268 FMI 02 Check Programmable Parameters
950G Series II Wheel Loader Hydraulic Principles
D10R Track-Type Tractor Parking
2004/03/22 A New Retainer Plate For The Final Drive Bearing And Thrust Washer Improves The Service Life {4050}
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Bank Valve - Assemble
2004/03/22 A New Rear Cluster Idler Gear is Available {1204}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Steering Frame Lock - Separate and Connect
2004/04/12 An Updated Lines Group Improves Reliability In Certain Conditions {5057, 6203}
D10R Track-Type Tractor Daily Inspection
854G Wheel Dozer Hydraulic System Main Control Valve
D10R Track-Type Tractor Seat
992G Wheel Loader and 854G Wheel Dozer Power Train Impeller Clutch of the Torque Converter (Electronic Technician) - Calibrate
992G Wheel Loader and 854G Wheel Dozer Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Electronic Technician) - Calibrate
992G Wheel Loader and 854G Wheel Dozer Power Train Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate
Product Link PL-102C System Installation{7606} Product Link PL-102C System Installation{7606}