Capacitor - Test
Show/hide table
 | |
| Illustration 1 | g01065213 |
Capacitor Housing (1) Housing (2) Terminal | |
- Touch terminal (2) to housing (1) in order to discharge the capacitor.
Note: Discharge the capacitor after each measurement.
- Connect the negative multimeter lead to the capacitor housing (1) and the positive multimeter lead to the ring terminal (2) .
- Measure the resistance and record the results.
- Repeat Step 2.
- Reverse the leads and measure again.
Expected Result: The resistance is low for a short period of time. Then the resistance gradually increases to greater than 100000 ohms.
Results:
OK - The resistance gradually increases to greater than 100000 ohms. The capacitor is normal.
NOT OK - The resistance is infinite or the resistance does not gradually increase to greater than 100000 ohms. Replace the capacitor.
Caterpillar Information System:
902, 906 and 908 Compact Wheel Loaders Maintenance Interval Schedule - 906 and 908 Compact Wheel Loaders
2004/03/22 New Thrust Discs Improve the Service Life of the Planetary Carriers and the Planetary Gear Mills {3030}
902, 906 and 908 Compact Wheel Loaders Maintenance Interval Schedule - 902 Compact Wheel Loaders
AD45B Underground Articulated Truck Power Train Output Transfer Gears - Assemble
AD45B Underground Articulated Truck Power Train Output Transfer Gears - Disassemble
2004/05/10 New Test ECM Available for Machines {0785, 7610}
Product Link PL-102C System Installation{7606} Product Link PL-102C System Installation{7606}
992G Wheel Loader and 854G Wheel Dozer Power Train Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate
992G Wheel Loader and 854G Wheel Dozer Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Electronic Technician) - Calibrate
992G Wheel Loader and 854G Wheel Dozer Power Train Impeller Clutch of the Torque Converter (Electronic Technician) - Calibrate
D10R Track-Type Tractor Seat
854G Wheel Dozer Hydraulic System Main Control Valve
906 and 908 Wheel Loaders Hydraulic and Steering System Fan and Coupler Hydraulic System
SCJ and 8SC Series Alternators Field Winding - Test
SCJ and 8SC Series Alternators Stator - Test
Installation of New Operator Control Joysticks{4122} Installation of New Operator Control Joysticks{4122}
906 and 908 Wheel Loaders Hydraulic and Steering System Work Tool Hydraulic System
D11R Track-Type Tractor Daily Inspection
3408E and 3412E Engines for Caterpillar Built Machines Flash Programming
D11R Track-Type Tractor Bulldozer Blade Control
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Accessory Drive (Upper Left Hand)
988G Wheel Loader Power Train Torque Converter (Lockup) - Disassemble
950G Series II Wheel Loader System Components
988G Wheel Loader Power Train Torque Converter (Lockup) - Assemble