Field Winding - Test
Field Winding Continuity Test
Show/hide table
Illustration 1 | g01065374 |
Rotor Assembly (3) Slip Rings (4) Rotor (5) Rotor Shaft |
- Set the multimeter to the 200 ohm resistance scale. Measure the resistance between the slip rings (3) .
- The resistance between the slip rings (3) should be within the following values.
Resistance of field winding at 24 °C (75 °F)
- Replace the rotor (4) if the measurement is incorrect.
Field Winding Ground Test
- Set the multimeter to the 20 M ohm resistance scale. Measure the resistance between one of the slip rings (3) and the rotor shaft (5) .
- The multimeter reading should be greater than 100 K Ohms (0.100 M Ohms).
- Replace the rotor (4) if the multimeter reading is low. Low resistance indicates undesired continuity between the field winding and the rotor shaft.
- Repeat steps 1 through 3 for the other slip ring (3) .
Caterpillar Information System:
906 and 908 Wheel Loaders Hydraulic and Steering System Fan and Coupler Hydraulic System
SCJ and 8SC Series Alternators Capacitor - Test
902, 906 and 908 Compact Wheel Loaders Maintenance Interval Schedule - 906 and 908 Compact Wheel Loaders
2004/03/22 New Thrust Discs Improve the Service Life of the Planetary Carriers and the Planetary Gear Mills {3030}
902, 906 and 908 Compact Wheel Loaders Maintenance Interval Schedule - 902 Compact Wheel Loaders
AD45B Underground Articulated Truck Power Train Output Transfer Gears - Assemble
AD45B Underground Articulated Truck Power Train Output Transfer Gears - Disassemble
2004/05/10 New Test ECM Available for Machines {0785, 7610}
Product Link PL-102C System Installation{7606} Product Link PL-102C System Installation{7606}
992G Wheel Loader and 854G Wheel Dozer Power Train Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate
992G Wheel Loader and 854G Wheel Dozer Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Electronic Technician) - Calibrate
992G Wheel Loader and 854G Wheel Dozer Power Train Impeller Clutch of the Torque Converter (Electronic Technician) - Calibrate
SCJ and 8SC Series Alternators Stator - Test
Installation of New Operator Control Joysticks{4122} Installation of New Operator Control Joysticks{4122}
906 and 908 Wheel Loaders Hydraulic and Steering System Work Tool Hydraulic System
D11R Track-Type Tractor Daily Inspection
3408E and 3412E Engines for Caterpillar Built Machines Flash Programming
D11R Track-Type Tractor Bulldozer Blade Control
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Accessory Drive (Upper Left Hand)
988G Wheel Loader Power Train Torque Converter (Lockup) - Disassemble
950G Series II Wheel Loader System Components
988G Wheel Loader Power Train Torque Converter (Lockup) - Assemble
D10R Track-Type Tractor Engine Starting with Prelubrication System
D11R Track-Type Tractor Operation Information