Lift Cylinder
Show/hide table
Illustration 1 | g00988146 |
(1) Torque for nut with lubrication on threads ... 3400 ± 340 N·m (2500 ± 250 lb ft)
(2) Bore of cylinder ... 139.75 ± 0.10 mm (5.500 ± 0.004 inch)
(3) Diameter of rod ... 69.80 ± 0.038 mm (2.7480 ± 0.0015 inch)
(4) Torque for crown with lubrication on threads ... 600 ± 130 N·m (442.0 ± 95.8 lb ft)
Note: Lubricate the outside diameter of the head and lubricate the inside diameter of the crown with clean lubricant.
Caterpillar Information System:
3044C Industrial Engine and Engines for Caterpillar Built Machines Glow Plugs
Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000} Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000}
D6N Track-Type Tractor Power Train Track Roller Frame - Install
D6N Track-Type Tractor Power Train Track Roller Frame - Remove
D6N Track-Type Tractor Power Train Track Adjuster - Remove and Install
D6N Track-Type Tractor Power Train Pivot Bar-Remove and Install
D6N Track-Type Tractor Power Train Front Track Roller Frame - Install
D6N Track-Type Tractor Power Train Front Track Roller Frame - Remove
D6N Track-Type Tractor Power Train Equalizer Bar - Remove
D6N Track-Type Tractor Power Train Equalizer Bar - Install
C15 Petroleum Generator Set Engines Gear Group (Front)
C7 Engines for Caterpillar Built Machines Unit Injector - Install
963C Track-Type Loader Hydraulic System Tilt Cylinder
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Disassemble" {3030, 3160}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission Control (Shift Lever)
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Assemble" {3030, 3160}
963C Track-Type Loader Capacities (Refill)
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073} Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073}
2003/06/09 New Tilt Cylinder and Lines Are Now Used {5057, 5104}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Metering Pump (HMU) - Remove