New Tilt Cylinder and Lines Are Now Used {5057, 5104}
- Track-Type Loader:
- 953C (S/N: 2ZN1-UP)
Description of Change: A new tilt cylinder and a new tilt cylinder lines group are now used on 953C Track-Type Loaders. The new tilt cylinder and new lines increase service life by reducing leakage.
Adaptable To: The new 224-5730 Tilt Cylinder and the new 221-6727 Tilt Cylinder Lines Group are effective with 953C (S/N: 2ZN5608-UP) Track-Type Loaders. The new 224-5730 Tilt Cylinder replaces the former 1U-0418 Tilt Cylinder. The new 221-6727 Tilt Cylinder Lines Group replaces the former 7P-2640 Tilt Cylinder Lines Group .
The new tilt cylinder is adaptable to 953C (S/N: 2ZN1-5607) Track-Type Loader. In order to replace the tilt cylinder, the following lines will also need to be replaced:
Show/hide table
 | |
| Illustration 1 | g00988394 |
Improved tilt cylinder and lines | |
Caterpillar Information System:
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073} Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073}
963C Track-Type Loader Capacities (Refill)
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Assemble" {3030, 3160}
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission Control (Shift Lever)
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Disassemble" {3030, 3160}
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
963C Track-Type Loader Hydraulic System Tilt Cylinder
963C Track-Type Loader Hydraulic System Lift Cylinder
3044C Industrial Engine and Engines for Caterpillar Built Machines Glow Plugs
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Metering Pump (HMU) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Control Valve (Service) - Remove and Install
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Assemble
613C Series II Wheel Tractor-Scraper Hydraulic System Vane Motor (Elevator)
2003/03/31 Correction to the Disassembly and Assembly , "Transmission Hydraulic Control Valve - Disassemble" {3073, 3167}
613C Series II Wheel Tractor-Scraper Hydraulic System Bowl Circuit
Installation of Direct Conversion Center Tread Idlers {4159} Installation of Direct Conversion Center Tread Idlers {4159}
953C Track-Type Loader Before Operation