Brake Proportional Manifold (Traction Control System) - Disassemble
Disassembly Procedure
Start By:
- Remove the proportional brake valve. Refer to Disassembly and Assembly, "Brake Valve (Proportional) (Traction Control System) - Remove".
- Remove the following items from manifold (1) : nuts (2), spacers (3) and coil assemblies (4) .
Show/hide table
Illustration 1 | g00282838 |
Show/hide table
Illustration 2 | g00282839 |
- Remove cartridge assemblies (5) from manifold (1) .
Show/hide table
Illustration 3 | g00282840 |
- Remove O-ring seals (6) from cartridge assemblies (5) .
Show/hide table
Illustration 4 | g00282842 |
- Remove valves (7) from manifold (1) .
Show/hide table
Illustration 5 | g00282843 |
- Remove O-ring seals (8) and the rings from valves (7) .
Show/hide table
Illustration 6 | g00282845 |
- Remove nut (10) and coil assembly (9) from manifold (1) .
Show/hide table
Illustration 7 | g00282846 |
- Remove cartridge assembly (11) from manifold (1) .
Show/hide table
Illustration 8 | g00282848 |
- Remove O-ring seals (12) and the rings from cartridge assembly (11) .
Show/hide table
Illustration 9 | g00282850 |
- Remove plugs (13), plug (14), and fitting (15) from manifold (1) .
Show/hide table
Illustration 10 | g00282851 |
Caterpillar Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Remove
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Control Valve (Service) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Metering Pump (HMU) - Remove
2003/06/09 New Tilt Cylinder and Lines Are Now Used {5057, 5104}
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073} Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073}
963C Track-Type Loader Capacities (Refill)
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Assemble" {3030, 3160}
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission Control (Shift Lever)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Assemble
613C Series II Wheel Tractor-Scraper Hydraulic System Vane Motor (Elevator)
2003/03/31 Correction to the Disassembly and Assembly , "Transmission Hydraulic Control Valve - Disassemble" {3073, 3167}
613C Series II Wheel Tractor-Scraper Hydraulic System Bowl Circuit
Installation of Direct Conversion Center Tread Idlers {4159} Installation of Direct Conversion Center Tread Idlers {4159}
953C Track-Type Loader Before Operation
613C Series II Wheel Tractor-Scraper Hydraulic System Ejector Circuit
651E and 657E Wheel Tractor-Scrapers Power train Operational Checks
613C Series II Wheel Tractor-Scraper Hydraulic System Elevator Circuit
953C Track-Type Loader Cooling System Extended Life Coolant Extender - Add
Supplemental Documentation for the Payload Control System{7494} Supplemental Documentation for the Payload Control System{7494}
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble