Pistons and Connecting Rods - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 4C-3601     | 活塞环扩展器     | 1     |
B     | 1P-1861     | 挡圈钳     | 1     |
开始:
- 卸下活塞和连杆。 请参阅拆解和组装, "活塞和连杆 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (B) 拆下挡圈 (2) 。
Show/hide table
图 1 | g01126141 |
- 拆卸活塞销 (5) 并将活塞 (1) 从连杆 (3) 上分离。
- 使用工具 (A) ,拆下活塞环 (4) 。
Caterpillar Information System:
Supplemental Documentation for the Payload Control System{7494} Supplemental Documentation for the Payload Control System{7494}
953C Track-Type Loader Cooling System Extended Life Coolant Extender - Add
613C Series II Wheel Tractor-Scraper Hydraulic System Elevator Circuit
651E and 657E Wheel Tractor-Scrapers Power train Operational Checks
613C Series II Wheel Tractor-Scraper Hydraulic System Ejector Circuit
953C Track-Type Loader Before Operation
Installation of Direct Conversion Center Tread Idlers {4159} Installation of Direct Conversion Center Tread Idlers {4159}
613C Series II Wheel Tractor-Scraper Hydraulic System Bowl Circuit
2003/03/31 Correction to the Disassembly and Assembly , "Transmission Hydraulic Control Valve - Disassemble" {3073, 3167}
613C Series II Wheel Tractor-Scraper Hydraulic System Vane Motor (Elevator)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Disassemble
966F Series II Wheel Loader Power Train Transmission Hydraulic Control Valve - Disassemble
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C7 Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
651E and 657E Wheel Tractor-Scrapers Hydraulic System Cylinder Cycle Time - Check
C7 Engines for Caterpillar Built Machines Unit Injector Sleeve - Remove
3500B Series II Marine Engines Prelubrication System
C7 Engines for Caterpillar Built Machines Unit Injector Sleeve - Install
AD30 Underground Articulated Truck Drive Shaft Universal Joints, Splines and Bearings - Inspect/Lubricate
AD30 Underground Articulated Truck Ejector Cylinder Bearing - Lubricate
Installation of 9SU (S/N: 9RP; T9J) and 9U (S/N: 9MP; T9H) Bulldozer with a Single Tilt Cylinder {5104, 6050} Installation of 9SU (S/N: 9RP; T9J) and 9U (S/N: 9MP; T9H) Bulldozer with a Single Tilt Cylinder {5104, 6050}
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
2003/03/31 Correction to Disassembly and Assembly , "Axle Shaft Assemblies" {3259}