Correction to Disassembly and Assembly , "Axle Shaft Assemblies" {3259}
- Wheel Loaders:
- 938F (S/N: 1KM1-UP; 2RM1-UP; 8SM1-UP; 7SN1-UP)
A portion of the existing information is incorrect. Replace the first table with the following information. The remainder of the information is correct.
Show/hide table
| Required Tools | ||||||||
| Part Number | Description | A | B | C | D | E | F | G |
| 6V-2157 | Link Bracket | 2 | ||||||
| 1P-1863 | Pliers | 1 | ||||||
| 6V-2156 | Link Bracket | 3 | ||||||
| 6V-7820 | Torque Multiplier | 1 | ||||||
| 1U-9478 | Spanner Wrench Assembly | 1 | ||||||
| FT-1183 | Plate | 1 | ||||||
| 1U-6436 | Installer | 1 | ||||||
| 1P-2420 | Transmission Repair Stand | 1 | ||||||
Caterpillar Information System:
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Installation of 9SU (S/N: 9RP; T9J) and 9U (S/N: 9MP; T9H) Bulldozer with a Single Tilt Cylinder {5104, 6050} Installation of 9SU (S/N: 9RP; T9J) and 9U (S/N: 9MP; T9H) Bulldozer with a Single Tilt Cylinder {5104, 6050}
AD30 Underground Articulated Truck Ejector Cylinder Bearing - Lubricate
AD30 Underground Articulated Truck Drive Shaft Universal Joints, Splines and Bearings - Inspect/Lubricate
C7 Engines for Caterpillar Built Machines Unit Injector Sleeve - Install
3500B Series II Marine Engines Prelubrication System
C7 Engines for Caterpillar Built Machines Unit Injector Sleeve - Remove
651E and 657E Wheel Tractor-Scrapers Hydraulic System Cylinder Cycle Time - Check
C7 Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
966F Series II Wheel Loader Power Train Transmission Hydraulic Control Valve - Disassemble
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
3508B Engine for Caterpillar Built Machines Air Cleaner
3044C Industrial Engine and Engines for Caterpillar Built Machines Lifter Group
2003/04/07 Special Instruction, REHS1353, "Field Installation of the Engine Speed Control" Is Available {1915}
2003/03/31 Correction to Disassembly and Assembly , "Gear Pump (Axle Oil Cooler) - Remove and Install" {5073}
2003/03/31 Correction to Disassembly and Assembly , "Drive Axle Shafts" {3259}
2003/03/31 Correction to Disassembly and Assembly , "Axle Shaft - Remove and Install" {3259}
G3500B Engines Start/Stop Control
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Camshaft
AD30 Underground Articulated Truck Fan Drive Bearing - Lubricate
AD30 Underground Articulated Truck Hoist Cylinder Bearings - Lubricate
AD30 Underground Articulated Truck Body Pivot Bearings - Lubricate
AD30 Underground Articulated Truck Oscillating Hitch - Lubricate