Air Cleaner
Show/hide table
Illustration 1 | g00989585 |
Front view |
Show/hide table
Illustration 2 | g00989595 |
Top view |
(1) Bolt
Torque ...
(2) Bolt
Torque ...
(3) Clamp
If dual clamps are used, orient the clamps so that the bolts are separated by a minimum of 90°.
- Torque ...
10 ± 2 N·m (7 ± 1 lb ft)
Caterpillar Information System:
2003/03/31 Correction to Disassembly and Assembly , "Axle Shaft Assemblies" {3259}
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Installation of 9SU (S/N: 9RP; T9J) and 9U (S/N: 9MP; T9H) Bulldozer with a Single Tilt Cylinder {5104, 6050} Installation of 9SU (S/N: 9RP; T9J) and 9U (S/N: 9MP; T9H) Bulldozer with a Single Tilt Cylinder {5104, 6050}
AD30 Underground Articulated Truck Ejector Cylinder Bearing - Lubricate
AD30 Underground Articulated Truck Drive Shaft Universal Joints, Splines and Bearings - Inspect/Lubricate
C7 Engines for Caterpillar Built Machines Unit Injector Sleeve - Install
3500B Series II Marine Engines Prelubrication System
C7 Engines for Caterpillar Built Machines Unit Injector Sleeve - Remove
651E and 657E Wheel Tractor-Scrapers Hydraulic System Cylinder Cycle Time - Check
C7 Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
966F Series II Wheel Loader Power Train Transmission Hydraulic Control Valve - Disassemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Lifter Group
2003/04/07 Special Instruction, REHS1353, "Field Installation of the Engine Speed Control" Is Available {1915}
2003/03/31 Correction to Disassembly and Assembly , "Gear Pump (Axle Oil Cooler) - Remove and Install" {5073}
2003/03/31 Correction to Disassembly and Assembly , "Drive Axle Shafts" {3259}
2003/03/31 Correction to Disassembly and Assembly , "Axle Shaft - Remove and Install" {3259}
G3500B Engines Start/Stop Control
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Camshaft
AD30 Underground Articulated Truck Fan Drive Bearing - Lubricate
AD30 Underground Articulated Truck Hoist Cylinder Bearings - Lubricate
AD30 Underground Articulated Truck Body Pivot Bearings - Lubricate
AD30 Underground Articulated Truck Oscillating Hitch - Lubricate
C7 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove