Connecting Rod Bearings - Remove
拆卸步骤
开始:
- 拆卸发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
图 1 | g01126410 |
- 转动曲轴,直到可以接近连杆轴承盖。
- 在连杆 (3) 和连杆轴承盖 (2) 上作识别标记。 该编号必须与气缸号一致。
- 从连杆 (3) 上卸下螺栓 (1) 和连杆轴承盖 (2) 。 从连杆轴承盖 (2) 上拆下连杆轴承 (4) 的下半部分。
- 将连杆推离曲轴。 从连杆 (3) 上拆下连杆轴承 (4) 的上半部分。
Caterpillar Information System:
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission Control (Shift Lever)
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Disassemble" {3030, 3160}
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
963C Track-Type Loader Hydraulic System Tilt Cylinder
963C Track-Type Loader Hydraulic System Lift Cylinder
3044C Industrial Engine and Engines for Caterpillar Built Machines Glow Plugs
Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000} Supplement for the 973C Track-Type Loader with the Steel Mill Arrangement{7000}
D6N Track-Type Tractor Power Train Track Roller Frame - Install
D6N Track-Type Tractor Power Train Track Roller Frame - Remove
D6N Track-Type Tractor Power Train Track Adjuster - Remove and Install
D6N Track-Type Tractor Power Train Pivot Bar-Remove and Install
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Assemble" {3030, 3160}
963C Track-Type Loader Capacities (Refill)
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073} Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073}
2003/06/09 New Tilt Cylinder and Lines Are Now Used {5057, 5104}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Metering Pump (HMU) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Control Valve (Service) - Remove and Install
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Assemble