Brake Proportional Manifold (Traction Control System) - Install
Installation Procedure
- Install proportional brake valve (5), the spacers and bolts (7) .
Show/hide table
Illustration 1 | g00282291 |
- Connect four electrical connectors (6) and one electrical connector (8) .
- Connect three tube assemblies (3) and five hose assemblies (4) to proportional brake valve (5) .
Show/hide table
Illustration 2 | g00282290 |
- Install cover (2) and nuts (1) .
Show/hide table
Illustration 3 | g00282289 |
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Remove
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Control Valve (Service) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Metering Pump (HMU) - Remove
2003/06/09 New Tilt Cylinder and Lines Are Now Used {5057, 5104}
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073} Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Splined Coupling Drive{3030, 3066, 3073}
963C Track-Type Loader Capacities (Refill)
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Assemble" {3030, 3160}
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission Control (Shift Lever)
2003/03/31 Correction to Disassembly and Assembly , "Transmission Planetary - Disassemble" {3030, 3160}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Assemble
613C Series II Wheel Tractor-Scraper Hydraulic System Vane Motor (Elevator)
2003/03/31 Correction to the Disassembly and Assembly , "Transmission Hydraulic Control Valve - Disassemble" {3073, 3167}
613C Series II Wheel Tractor-Scraper Hydraulic System Bowl Circuit
Installation of Direct Conversion Center Tread Idlers {4159} Installation of Direct Conversion Center Tread Idlers {4159}
953C Track-Type Loader Before Operation
613C Series II Wheel Tractor-Scraper Hydraulic System Ejector Circuit
651E and 657E Wheel Tractor-Scrapers Power train Operational Checks
613C Series II Wheel Tractor-Scraper Hydraulic System Elevator Circuit
953C Track-Type Loader Cooling System Extended Life Coolant Extender - Add
Supplemental Documentation for the Payload Control System{7494} Supplemental Documentation for the Payload Control System{7494}