3046 Engine for Caterpillar Built Machines Caterpillar


Flywheel Housing - Inspect

Usage:

D4C III 1FW


图 1g00987862
飞轮壳的部件分解图
(1) 螺栓
(2) 密封垫
(3) 飞轮壳
(4) 后油封

  • 检查定位销孔是否有裂纹或损坏。

  • 检查将飞轮壳固定到位的螺栓 (1) 的螺纹是否滑脱。

  • 检查后油封 (4) 是否漏油或损坏。
  • Caterpillar Information System:

    C15 Petroleum Generator Set Engines Electronic Unit Injector Rocker Arm
    C4.4 (Mech) Industrial Engine Battery - Test
    2003/03/24 New Flash Software Allows Calibrations of the Power Train to be Performed by Using the Caterpillar Electronic Technician {0783, 0785, 7620}
    Support literature for the Lincoln Industrial Quicklub System for the 988G Wheel Loader{7540} Support literature for the Lincoln Industrial Quicklub System for the 988G Wheel Loader{7540}
    980G Series II Wheel Loader Electrohydraulic System Hydraulic Fan Speed - Test and Adjust
    C7 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
    2003/10/27 Special Instruction, REHS1522 , "Instruction Book for the Lincoln Quicklub® Automatic Lubrication System for the 988G Model Wheel Loaders" is Available {7540}
    615C Series II Wheel Tractor-Scraper Air System and Brakes Pressure Protection Valve (Brake Air System)
    615C Series II Wheel Tractor-Scraper Air System and Brakes Differential Lock Control
    611 and 615C Series II Wheel Tractor-Scrapers Steering System Steering System Troubleshooting
    611 and 615C Series II Wheel Tractor-Scrapers Steering System Piston Pump (Secondary Steering)
    611 and 615C Series II Wheel Tractor-Scrapers Steering System General Information
    2003/06/23 Correction to Testing And Adjusting , "Transmission Testing and Location of The Pressure Taps" {3030, 3073}
    2003/04/21 Correction to Testing and Adjusting , "Pressure Tap Locations" {3030}
    C7 Engines for Caterpillar Built Machines Unit Injector - Remove
    C7 Engines for Caterpillar Built Machines Unit Injector - Install
    C15 Petroleum Generator Set Engines Gear Group (Front)
    D6N Track-Type Tractor Power Train Equalizer Bar - Install
    D6N Track-Type Tractor Power Train Equalizer Bar - Remove
    D6N Track-Type Tractor Power Train Front Track Roller Frame - Remove
    D6N Track-Type Tractor Power Train Front Track Roller Frame - Install
    D6N Track-Type Tractor Power Train Pivot Bar-Remove and Install
    D6N Track-Type Tractor Power Train Track Adjuster - Remove and Install
    D6N Track-Type Tractor Power Train Track Roller Frame - Remove
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.