Valve Mechanism Cover
Valve Cover Base
Show/hide table
Illustration 1 | g01528422 |
Tightening sequence for the base of the valve cover |
(1) The face of four clips must be parallel to the center line of the crankshaft.
(2) The face of the clip must be oriented to 110 degrees from the centerline of the crankshaft.
Tighten the bolts in a numerical sequence that is shown in Illustration 1 to the standard torque.
Valve Cover
Show/hide table
Illustration 2 | g01212682 |
Tightening sequence for the valve cover |
Tighten the bolts in a numerical sequence that is shown in Illustration 2 to 20 ± 3 N·m (15 ± 2 lb ft).
Caterpillar Information System:
C3.3 and C4.4 Generator Sets Engine Oil Relief Valve - Remove and Install
C4.4 Marine Generator Set Engines Engine Oil Cooler - Install
C4.4 Marine Generator Set Engines Engine Oil Cooler - Remove
C280 Marine Engines Aftercooler
C280 Marine Engines Air Inlet and Exhaust System Operation
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Glossary of Electrical Terms
Caterpillar 270 Air Compressor Air Compressor Maintenance Procedures
C4.4 (Mech) Marine Generator Set MCS-3 Control Panel Mounting
C4.4 Marine Auxiliary Generator Set Engine Generator Coupling
C4.4 Marine Auxiliary Generator Set Engine Breather Mounting Bracket
C4.4 Marine Generator Set Engines Engine Oil Filter Base - Remove and Install
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Engine Lifting Bracket
325D and 329D Excavators Cab Door
C280 Marine and Petroleum Engines Lubrication System Operation
C6.6 Industrial Engine Engine Oil and Filter - Change
3500B and 3500C Generator Set Engines Cat Data Link
C9 Generator Set Engines Air Inlet and Exhaust System
Dynamometer Testing of Caterpillar Engines {0781, 1000} Dynamometer Testing of Caterpillar Engines {0781, 1000}
C3.3 and C4.4 Generator Sets Engine Oil Pump - Remove
C3.3 and C4.4 Generator Sets Engine Oil Pump - Install
C280 Marine and Petroleum Engines Pistons, Rings and Connecting Rods
3500B and 3500C Generator Set Engines Digital Sensor Supply
C6.6 Industrial Engine Fuel System - Prime
C6.6 Industrial Engine Fuel System Secondary Filter - Replace