Engine Oil Relief Valve - Remove and Install
Start By:
- Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove plug (2). Remove spring (3) and plunger (4) from engine oil pump assembly (1).
- Check spring (3) and plunger (4) for wear or for other damage. Plunger (4) must slide easily in engine oil pump assembly (1).
Show/hide table
Illustration 1 | g00959674 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Clean the spring and the plunger of the engine oil relief valve. Lubricate the spring and the plunger with clean engine oil.
Show/hide table
Illustration 2 g00959674 Show/hide tableImproper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Install plunger (4) and spring (3) in engine oil pump assembly (1).
- Install plug (2). Tighten plug (2) to a torque of
22 N·m (16 lb ft) .
End By:
- Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar Information System:
C4.4 Marine Generator Set Engines Engine Oil Cooler - Install
C4.4 Marine Generator Set Engines Engine Oil Cooler - Remove
C280 Marine Engines Aftercooler
C280 Marine Engines Air Inlet and Exhaust System Operation
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Glossary of Electrical Terms
Caterpillar 270 Air Compressor Air Compressor Maintenance Procedures
C4.4 (Mech) Marine Generator Set MCS-3 Control Panel Mounting
C4.4 Marine Auxiliary Generator Set Engine Generator Coupling
C4.4 Marine Auxiliary Generator Set Engine Breather Mounting Bracket
C4.4 Marine Generator Set Engines Engine Oil Filter Base - Remove and Install
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Engine Lifting Bracket
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Engine Lifting Bracket
C7 On-highway Engine Valve Mechanism Cover
325D and 329D Excavators Cab Door
C280 Marine and Petroleum Engines Lubrication System Operation
C6.6 Industrial Engine Engine Oil and Filter - Change
3500B and 3500C Generator Set Engines Cat Data Link
C9 Generator Set Engines Air Inlet and Exhaust System
Dynamometer Testing of Caterpillar Engines {0781, 1000} Dynamometer Testing of Caterpillar Engines {0781, 1000}
C3.3 and C4.4 Generator Sets Engine Oil Pump - Remove
C3.3 and C4.4 Generator Sets Engine Oil Pump - Install
C280 Marine and Petroleum Engines Pistons, Rings and Connecting Rods
3500B and 3500C Generator Set Engines Digital Sensor Supply
C6.6 Industrial Engine Fuel System - Prime