Engine Oil Cooler - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Clean the mating surfaces of the engine oil cooler housing and the cylinder block.
Show/hide table
Illustration 1 g00952614 - Position engine oil cooler (2) and seals (5) on engine oil cooler housing (3). Install bolts (7) in order to secure the engine oil cooler to engine oil cooler housing (3).
Note: Do Not use sealants on gasket (1).
- Position engine oil cooler housing (3) and gasket (1) on the cylinder block. Install bolts (4) and bolts (6) in order to secure engine oil cooler housing (3) to the cylinder block.
- Fill the lubrication system with engine oil. Refer to Operation and Maintenance Manual, "Engine Oil - Change" and Operation and Maintenance Manual, "Capacities (Refill)".
- Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" and Operation and Maintenance Manual, "Capacities (Refill)".
Caterpillar Information System:
C4.4 Marine Generator Set Engines Engine Oil Cooler - Remove
C280 Marine Engines Aftercooler
C280 Marine Engines Air Inlet and Exhaust System Operation
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Glossary of Electrical Terms
Caterpillar 270 Air Compressor Air Compressor Maintenance Procedures
C4.4 (Mech) Marine Generator Set MCS-3 Control Panel Mounting
C4.4 Marine Auxiliary Generator Set Engine Generator Coupling
C4.4 Marine Auxiliary Generator Set Engine Breather Mounting Bracket
C4.4 Marine Generator Set Engines Engine Oil Filter Base - Remove and Install
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Engine Lifting Bracket
3054C and C4.4 Industrial Engine and Marine Auxiliary Engine Engine Lifting Bracket
Caterpillar 270 Air Compressor General Information
C3.3 and C4.4 Generator Sets Engine Oil Relief Valve - Remove and Install
C7 On-highway Engine Valve Mechanism Cover
325D and 329D Excavators Cab Door
C280 Marine and Petroleum Engines Lubrication System Operation
C6.6 Industrial Engine Engine Oil and Filter - Change
3500B and 3500C Generator Set Engines Cat Data Link
C9 Generator Set Engines Air Inlet and Exhaust System
Dynamometer Testing of Caterpillar Engines {0781, 1000} Dynamometer Testing of Caterpillar Engines {0781, 1000}
C3.3 and C4.4 Generator Sets Engine Oil Pump - Remove
C3.3 and C4.4 Generator Sets Engine Oil Pump - Install
C280 Marine and Petroleum Engines Pistons, Rings and Connecting Rods
3500B and 3500C Generator Set Engines Digital Sensor Supply