C7 Engines for Caterpillar Built Machines Caterpillar


Water Pump

Usage:

535C 535



图 1g01541114

(A) 水泵密封组件的工作高度 ... 12.83 ± 0.13 mm (0.505 ± 0.005 in)

(B) 泵叶轮和泵壳间的间隙 ... 0.75 ± 0.25 mm (0.030 ± 0.010 in)

(C) 皮带轮前端面到泵壳表面的距离 ... 103.8 ± 0.3 mm (4.09 ± 0.01 in)

Caterpillar Information System:

950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner and Heater) - Remove
2000/10/16 Grind a Chamfer Around the Exhaust Ports When New 194-8124 Sleeves Are Installed {1059}
Special Instruction For Replacing a 173-7793 Droop Module With a 197-3531 Droop Module{4467} Special Instruction For Replacing a 173-7793 Droop Module With a 197-3531 Droop Module{4467}
994D Wheel Loader Power Train Solenoid Valve (Transmission Clutch) - Test
2001/04/16 A New Spindle Is Available for Wheel Loaders, Wheel Tractors, and Landfill Compactors {4205}
988F Series II Wheel Loader Engine Supplement Fuel Filter and Fuel Filter Base (Primary) - Remove and Install - Removal and Installation in Machine
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 0144 - FMI 03
D7R Series II Track-Type Tractor Hydraulic System Implement Control Valve - Machines With a Ripper
D8R Series II Track-Type Tractor Engine Supplement Fumes Disposal - Remove and Install
973 Track-Type Loader Parking
973 Track-Type Loader Operation
988F Series II Wheel Loader Engine Supplement Fuel Priming Pump - Remove and Install - Removal and Installation in Machine
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner and Heater) - Install
994D Wheel Loader Power Train Speed Sensor (Transmission Output) - Adjust
902, 906 and 908 Compact Wheel Loaders Lifting and Tying Down the Machine
615C Series II Wheel Tractor-Scraper Hydraulic System Machine Preparation for Troubleshooting
D7R Series II Track-Type Tractor Hydraulic System Winch Control Valve
953C Track-Type Loader Power Train
953C Track-Type Loader Visual Inspection
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Payload Control System (PCS) - If Equipped
902, 906 and 908 Compact Wheel Loaders Capacities (Refill)
966F Wheel Loader and 966F Series II Wheel Loader Hydraulic System Pilot Hydraulic System
988G Wheel Loader Electrohydraulic System Gear Pump (Pilot and Braking)
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 0144 - FMI 06
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.