Implement Control Valve - Machines With a Ripper
Show/hide table
 | |
| Illustration 1 | g00739531 |
(1) Torque for three nuts ... 110 ± 8 N·m (80 ± 6 lb ft)
(2) Inlet manifold
(3) Torque for one plug ... 16 ± 2 N·m (12 ± 1.5 lb ft)
(4) (5) (6) Torque for three plugs ... 16 ± 2 N·m (12 ± 1.5 lb ft)
(7) Torque for main relief valve ... 135 ± 15 N·m (100 ± 11 lb ft)
(8) Torque for charging valve ... 135 ± 15 N·m (100 ± 11 lb ft)
(9) Torque for plug ... 25 ± 5 N·m (18 ± 4 lb ft)
(10) Bulldozer lift control valve
(11) Bulldozer tilt control valve
(12) Ripper lift control valve
(13) Torque for six O-ring plugs ... 24 ± 2 N·m (212 ± 18 lb in)
Caterpillar Information System:
D8R Series II Track-Type Tractor Engine Supplement Fumes Disposal - Remove and Install
973 Track-Type Loader Parking
973 Track-Type Loader Operation
988F Series II Wheel Loader Engine Supplement Fuel Priming Pump - Remove and Install - Removal and Installation in Machine
2000/09/18 Kits for BCP Machines Are Available from the Clayton Facility and the Sanford Facility {1350, 1375, 1400, 4300, 5050, 7000, 7050, 7300, 7405, 7430, 7557}
D8R Series II Track-Type Tractor Engine Supplement Fan Belt Tightener - Assemble
D8R Series II Track-Type Tractor Engine Supplement Fan Belt Tightener - Disassemble
994D Wheel Loader Power Train Reduced Rimpull Pressure - Test
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1227 - FMI 08
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Link - Install
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 0144 - FMI 03
988F Series II Wheel Loader Engine Supplement Fuel Filter and Fuel Filter Base (Primary) - Remove and Install - Removal and Installation in Machine
2001/04/16 A New Spindle Is Available for Wheel Loaders, Wheel Tractors, and Landfill Compactors {4205}
994D Wheel Loader Power Train Solenoid Valve (Transmission Clutch) - Test
Special Instruction For Replacing a 173-7793 Droop Module With a 197-3531 Droop Module{4467} Special Instruction For Replacing a 173-7793 Droop Module With a 197-3531 Droop Module{4467}
2000/10/16 Grind a Chamfer Around the Exhaust Ports When New 194-8124 Sleeves Are Installed {1059}
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner and Heater) - Remove
C7 Engines for Caterpillar Built Machines Water Pump
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner and Heater) - Install
994D Wheel Loader Power Train Speed Sensor (Transmission Output) - Adjust
902, 906 and 908 Compact Wheel Loaders Lifting and Tying Down the Machine
615C Series II Wheel Tractor-Scraper Hydraulic System Machine Preparation for Troubleshooting