Parking
Park on a level surface. If you must park on a grade, use blocks to prevent the machine from rolling.
Apply the service brake in order to stop the machine. Move the transmission control lever to PARK position and the speed control to LOW IDLE position. Engage the transmission lock lever.
Lower all attachments to the ground.
Stop the engine.
Turn the engine start switch key to OFF position and remove the key.
Turn the key for the battery disconnect switch to the OFF position. Remove the key when you exit the machine for an extended period of time.
Turning the battery disconnect switch to the OFF position will provide the following benefits:
- Prevent battery discharge that is caused by a battery short circuit.
- Prevent battery discharge that is caused by some of the components.
- Prevent battery discharge that is caused by vandalism.
Caterpillar Information System:
973 Track-Type Loader Operation
988F Series II Wheel Loader Engine Supplement Fuel Priming Pump - Remove and Install - Removal and Installation in Machine
2000/09/18 Kits for BCP Machines Are Available from the Clayton Facility and the Sanford Facility {1350, 1375, 1400, 4300, 5050, 7000, 7050, 7300, 7405, 7430, 7557}
D8R Series II Track-Type Tractor Engine Supplement Fan Belt Tightener - Assemble
D8R Series II Track-Type Tractor Engine Supplement Fan Belt Tightener - Disassemble
994D Wheel Loader Power Train Reduced Rimpull Pressure - Test
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1227 - FMI 08
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Link - Install
2000/10/01 Grind a Chamfer Around the Exhaust Ports When New 194-8124 Sleeves Are Installed {1059}
D8R Series II Track-Type Tractor Engine Supplement Engine Side Guards - Remove and Install
D8R Series II Track-Type Tractor Engine Supplement Fumes Disposal - Remove and Install
D7R Series II Track-Type Tractor Hydraulic System Implement Control Valve - Machines With a Ripper
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 0144 - FMI 03
988F Series II Wheel Loader Engine Supplement Fuel Filter and Fuel Filter Base (Primary) - Remove and Install - Removal and Installation in Machine
2001/04/16 A New Spindle Is Available for Wheel Loaders, Wheel Tractors, and Landfill Compactors {4205}
994D Wheel Loader Power Train Solenoid Valve (Transmission Clutch) - Test
Special Instruction For Replacing a 173-7793 Droop Module With a 197-3531 Droop Module{4467} Special Instruction For Replacing a 173-7793 Droop Module With a 197-3531 Droop Module{4467}
2000/10/16 Grind a Chamfer Around the Exhaust Ports When New 194-8124 Sleeves Are Installed {1059}
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner and Heater) - Remove
C7 Engines for Caterpillar Built Machines Water Pump
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner and Heater) - Install
994D Wheel Loader Power Train Speed Sensor (Transmission Output) - Adjust