Fumes Disposal - Remove and Install
Removal Procedure
Start By:
- Remove the engine side guard from the left side of the machine. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install" in this module.
- Loosen clamp (1) and disconnect hose (2) .
Show/hide table
Illustration 1 | g00739535 |
- Loosen clamp (3) and remove breather (4) .
- Remove the nut, the bolt, and the washer (5). Remove clip (6) .
Show/hide table
Illustration 2 | g00739556 |
- Remove the nut, the bolt, and the washer (7). Remove clip (8) .
Show/hide table
Illustration 3 | g00739543 |
- Remove the nut, the bolt, and the washer (9). Remove clip (10) .
Show/hide table
Illustration 4 | g00739538 |
- Loosen clamp (11) and disconnect hose (12) .
- Remove fumes disposal tube (13) from the machine.
- Remove the nut, the bolt, and the washer from the hose clip. Remove the hose clip from hose (12). Remove hose (12) from the machine.
Installation Procedure
- Install hose (12) on the machine. Install the hose clip on hose (12). Install the bolt, the washer, and the nut on the hose clip.
Show/hide table
Illustration 5 | g00739538 |
- Position fumes disposal tube (13) on the machine. Connect hose (12) to fumes disposal tube (13). Tighten clamp (11) .
- Install clip (10). Install the bolt, the washer, and the nut (9) .
- Install clip (8). Install the bolt, the washer, and the nut (7) .
Show/hide table
Illustration 6 | g00739543 |
- Install clip (6). Install the bolt, the washer, and the nut (5) .
Show/hide table
Illustration 7 | g00739556 |
- Install breather (4) on the machine. Connect hose (2). Tighten clamps (3) and (1) .
Show/hide table
Illustration 8 | g00739535 |
End By: Install the engine side guard on the left side of the machine. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install" in this module.
Caterpillar Information System:
973 Track-Type Loader Parking
973 Track-Type Loader Operation
988F Series II Wheel Loader Engine Supplement Fuel Priming Pump - Remove and Install - Removal and Installation in Machine
2000/09/18 Kits for BCP Machines Are Available from the Clayton Facility and the Sanford Facility {1350, 1375, 1400, 4300, 5050, 7000, 7050, 7300, 7405, 7430, 7557}
D8R Series II Track-Type Tractor Engine Supplement Fan Belt Tightener - Assemble
D8R Series II Track-Type Tractor Engine Supplement Fan Belt Tightener - Disassemble
994D Wheel Loader Power Train Reduced Rimpull Pressure - Test
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1227 - FMI 08
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Lever - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Tilt Link - Install
2000/10/01 Grind a Chamfer Around the Exhaust Ports When New 194-8124 Sleeves Are Installed {1059}
D7R Series II Track-Type Tractor Hydraulic System Implement Control Valve - Machines With a Ripper
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 0144 - FMI 03
988F Series II Wheel Loader Engine Supplement Fuel Filter and Fuel Filter Base (Primary) - Remove and Install - Removal and Installation in Machine
2001/04/16 A New Spindle Is Available for Wheel Loaders, Wheel Tractors, and Landfill Compactors {4205}
994D Wheel Loader Power Train Solenoid Valve (Transmission Clutch) - Test
Special Instruction For Replacing a 173-7793 Droop Module With a 197-3531 Droop Module{4467} Special Instruction For Replacing a 173-7793 Droop Module With a 197-3531 Droop Module{4467}
2000/10/16 Grind a Chamfer Around the Exhaust Ports When New 194-8124 Sleeves Are Installed {1059}
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner and Heater) - Remove
C7 Engines for Caterpillar Built Machines Water Pump
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Blower Motor (Air Conditioner and Heater) - Install
994D Wheel Loader Power Train Speed Sensor (Transmission Output) - Adjust
902, 906 and 908 Compact Wheel Loaders Lifting and Tying Down the Machine