Turbocharger - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 5P-3931     | 防粘结剂     | -     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 在排气歧管的涡轮增压器安装双头螺栓上涂抹工具 (A) 。
- 将适当的起吊设备连接在涡轮增压器 (2) 上。 涡轮增压器 (2) 的重量约为 27 kg (60 lb)。 在排气歧管上定位密封垫和涡轮增压器 (2) 。
Show/hide table
图 1 | g01150421 |
- 安装螺母 (3) 。 拧紧螺母 (3) 至扭矩为 54 ± 5 N·m (40 ± 4 lb ft)。
注: 弃置使用过的螺母。 安装时使用新螺母。
- 定位管组件 (5) 并安装螺栓 (4) 。
- 连接软管组件 (1) 。
Caterpillar Information System:
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Quick Coupler - Lubricate - If Equipped
D Series Excavator Monitoring System Password Entry
C9 Engines for Caterpillar Built Machines Turbocharger - Remove
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Install
C9 Generator Set Engines Engine Oil Pan
C27 and C32 Generator Set Engines Crankshaft - Install
C3.3 and C4.4 Generator Sets Fuel System Secondary Filter - Replace
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Remove
C27 and C32 Generator Set Engines Crankshaft - Remove
3054E Industrial Engine Idler Gear (Front) - Install
3054E Industrial Engine Idler Gear (Front) - Assemble
3054E Industrial Engine Idler Gear (Front) - Disassemble
2005/03/14 A New Engine Oil is Used for the Factory Fill in Gas Engines {1348}
C27 and C32 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
3406C Marine Auxiliary Generator Set Control Panel
C27 and C32 Generator Set Engines Camshaft Position Sensor - Remove and Install
C7 and C9 Marine Engines Diagnostic Code Cross Reference
C27 and C32 Generator Set Engines Crankshaft Position Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Remove
3126B Industrial Engines CID 0094 FMI 03 Fuel Pressure open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
Cleaning the Engine Mounted Heat Exchanger{1379} Cleaning the Engine Mounted Heat Exchanger{1379}
3126B Marine Engines CID 0127 FMI 03 Transmission Oil Pressure open/short to +batt
3126B Marine Engines CID 0127 FMI 04 Transmission Oil Pressure short to ground