Turbocharger - Remove
拆卸步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 断开软管组件 (1) 。
Show/hide table
图 1 | g01150421 |
- 拆下螺栓 (4) 和管组件 (5) 。
- 将适当起吊设备连在涡轮增压器 (2) 上。 涡轮增压器 (2) 的重量约为 27 kg (60 lb)。 拆下螺母 (3) 。 卸下涡轮增压器 (2) 和密封垫。
Caterpillar Information System:
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Install
C9 Generator Set Engines Engine Oil Pan
C27 and C32 Generator Set Engines Crankshaft - Install
C3.3 and C4.4 Generator Sets Fuel System Secondary Filter - Replace
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Remove
C27 and C32 Generator Set Engines Crankshaft - Remove
3054E Industrial Engine Idler Gear (Front) - Install
3054E Industrial Engine Idler Gear (Front) - Assemble
3054E Industrial Engine Idler Gear (Front) - Disassemble
994F Wheel Loader Hydraulic System Electronic Control Module (ECM) - Replace
784C and 785C Off-Highway Truck/Tractors Air Tank - Inspect
C7 and C9 Engines for Caterpillar Built Machines Injection Actuation Pressure Control Valve Circuit - Test
D Series Excavator Monitoring System Password Entry
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Quick Coupler - Lubricate - If Equipped
C9 Engines for Caterpillar Built Machines Turbocharger - Install
2005/03/14 A New Engine Oil is Used for the Factory Fill in Gas Engines {1348}
C27 and C32 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
3406C Marine Auxiliary Generator Set Control Panel
C27 and C32 Generator Set Engines Camshaft Position Sensor - Remove and Install
C7 and C9 Marine Engines Diagnostic Code Cross Reference
C27 and C32 Generator Set Engines Crankshaft Position Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines Engine Oil Filter Base and Oil Cooler - Remove
3126B Industrial Engines CID 0094 FMI 03 Fuel Pressure open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install