Parking Brake
Show/hide table
Illustration 1 | g00610957 |
Show/hide table
Illustration 2 | g00623744 |
The parking brake indicator (1) on the operator panel will light when the parking brake lever (2) is pulled up.
Show/hide table
NOTICE |
---|
Moving the machine with the parking brake engaged can cause excessive wear or damage to the brake. If necessary, have the brake repaired before operating the machine. |
Caterpillar Information System:
545 Wheel Skidder Power Train Service Brake - Remove and Install
613C Series II Wheel Tractor-Scraper Reference Material
613C Series II Wheel Tractor-Scraper Windows - Clean
924Gz Wheel Loader Single Lever Control - If Equipped
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet Manifold - Install - 3013, 3014, and 3024 Engines
613C Series II Wheel Tractor-Scraper Window Washer Reservoir - Fill
545 Wheel Skidder Power Train Axle Housing - Assemble
545 Wheel Skidder Machine Systems Lift Cylinder (Decking Blade) - Remove and Install
994D Wheel Loader Engine Supplement Prelubrication Oil Pump - Remove and Install
613C Series II Wheel Tractor-Scraper Belts - Inspect/Adjust/Replace
994D Wheel Loader Power Train Speed Sensor (Transmission Output) - Remove and Install
613C Series II Wheel Tractor-Scraper Air System and Brakes Parking and Secondary Brake Control Valve
545 Wheel Skidder Machine Systems Refrigerant Accumulator (With Desiccant) - Remove and Install
613C Series II Wheel Tractor-Scraper Lifting and Tying Down the Machine
545 Wheel Skidder Power Train Oscillating Axle (Front) - Install
613C Series II Wheel Tractor-Scraper Jacking/Blocking Locations
545 Wheel Skidder Power Train Manifold and Relief Valve (Differential Lock) - Remove and Install
994D Wheel Loader Power Train Transmission - Remove
994D Wheel Loader Power Train Differential and Bevel Gear (Front) - Install
994D Wheel Loader Power Train Fixed Axle (Front) - Install
994D Wheel Loader Power Train Gear Pump (Power Train) - Disassemble
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Liner - Install
545 Wheel Skidder Power Train Front Axle Support - Remove
994D Wheel Loader Power Train Drive Shaft (Front) - Remove and Install