Inlet Manifold - Install - 3013, 3014, and 3024 Engines
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: The inlet manifold that is used on the 3013, 3014 and 3024 Engines is removable as a separate part. The inlet manifold on the 3003 engine is part of the valve mechanism cover.
- Clean the cylinder head surface and the spacer plate for the inlet manifold. Ensure that no debris or gasket material is remaining on the mating surfaces.
- Install new spacer plate gasket (4) for the inlet manifold on the cylinder head.
Show/hide table
Illustration 1 | g00592865 |
- Install spacer plate (3) for the inlet manifold.
Show/hide table
Illustration 2 | g00592858 |
- Install a new gasket for the inlet manifold and position inlet manifold (2) on the cylinder head.
Show/hide table
Illustration 3 | g00592847 |
- Install bolts (1) that fasten the inlet manifold to the cylinder head and tighten bolts (1) to the following torque:
3013 Engine ... 10 N·m (90 lb in)
3014 and 3024 Engines ... 14 N·m (10 lb ft)
Caterpillar Information System:
613C Series II Wheel Tractor-Scraper Window Washer Reservoir - Fill
545 Wheel Skidder Power Train Axle Housing - Assemble
545 Wheel Skidder Machine Systems Lift Cylinder (Decking Blade) - Remove and Install
994D Wheel Loader Engine Supplement Prelubrication Oil Pump - Remove and Install
613C Series II Wheel Tractor-Scraper Belts - Inspect/Adjust/Replace
994D Wheel Loader Power Train Speed Sensor (Transmission Output) - Remove and Install
613C Series II Wheel Tractor-Scraper Air System and Brakes Parking and Secondary Brake Control Valve
613C Series II Wheel Tractor-Scraper Transmission Oil Level - Check
Activation of 101-4000 Batteries, 115-2421 Batteries, and 9X-9730 Batteries That Are Shipped Without Electrolyte {1401} Activation of 101-4000 Batteries, 115-2421 Batteries, and 9X-9730 Batteries That Are Shipped Without Electrolyte {1401}
994D Wheel Loader Power Train Speed Sensor (Torque Converter Output) - Remove and Install
Installation of New 123-4610 Conversion Kit for the Flywheel Clutch{1007, 1156} Installation of New 123-4610 Conversion Kit for the Flywheel Clutch{1007, 1156}
3500B Engines Engine Oil Filter Base - Install - Spin-on Filters
924Gz Wheel Loader Single Lever Control - If Equipped
613C Series II Wheel Tractor-Scraper Windows - Clean
613C Series II Wheel Tractor-Scraper Reference Material
545 Wheel Skidder Power Train Service Brake - Remove and Install
924Gz Wheel Loader Parking Brake
545 Wheel Skidder Machine Systems Refrigerant Accumulator (With Desiccant) - Remove and Install
613C Series II Wheel Tractor-Scraper Lifting and Tying Down the Machine
545 Wheel Skidder Power Train Oscillating Axle (Front) - Install
613C Series II Wheel Tractor-Scraper Jacking/Blocking Locations
545 Wheel Skidder Power Train Manifold and Relief Valve (Differential Lock) - Remove and Install
994D Wheel Loader Power Train Transmission - Remove
994D Wheel Loader Power Train Differential and Bevel Gear (Front) - Install