Transmission Oil Level - Check
The transmission oil dipstick is located on the right rear side of the transmission.
Wipe covers and surfaces around openings before you check the oil. Wipe covers and surfaces around openings before you add the oil.
Show/hide table
Illustration 1 | g00604444 |
- Park the machine on level ground. Lower the bowl to the ground.
- Maintain the oil between the "ADD" and "FULL" marks on dipstick (1). The transmission should be at operating temperature and the engine should be at low idle.
- Remove oil filler cap (2) and add oil if it is necessary.
- Clean oil filler cap (2) and install oil filler cap (2).
Caterpillar Information System:
Activation of 101-4000 Batteries, 115-2421 Batteries, and 9X-9730 Batteries That Are Shipped Without Electrolyte {1401} Activation of 101-4000 Batteries, 115-2421 Batteries, and 9X-9730 Batteries That Are Shipped Without Electrolyte {1401}
994D Wheel Loader Power Train Speed Sensor (Torque Converter Output) - Remove and Install
Installation of New 123-4610 Conversion Kit for the Flywheel Clutch{1007, 1156} Installation of New 123-4610 Conversion Kit for the Flywheel Clutch{1007, 1156}
3500B Engines Engine Oil Filter Base - Install - Spin-on Filters
613C Series II Wheel Tractor-Scraper Transmission Oil Filter and Magnetic Screen - Replace/Clean
613C Series II Wheel Tractor-Scraper Transmission Oil - Change
3500B Engines Engine Oil Filter Base - Assemble - Spin-on Filters
3500B Engines Engine Oil Filter Base - Disassemble - Spin-on Filters
613C Series II Wheel Tractor-Scraper Transmission Breather - Clean
545 Wheel Skidder Machine Systems Steering Cylinder - Remove and Install
3500B Engines Engine Oil Filter Base - Remove - Spin-on Filters
3500B Engines Engine Oil Filter Housing - Install
613C Series II Wheel Tractor-Scraper Air System and Brakes Parking and Secondary Brake Control Valve
994D Wheel Loader Power Train Speed Sensor (Transmission Output) - Remove and Install
613C Series II Wheel Tractor-Scraper Belts - Inspect/Adjust/Replace
994D Wheel Loader Engine Supplement Prelubrication Oil Pump - Remove and Install
545 Wheel Skidder Machine Systems Lift Cylinder (Decking Blade) - Remove and Install
545 Wheel Skidder Power Train Axle Housing - Assemble
613C Series II Wheel Tractor-Scraper Window Washer Reservoir - Fill
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet Manifold - Install - 3013, 3014, and 3024 Engines
924Gz Wheel Loader Single Lever Control - If Equipped
613C Series II Wheel Tractor-Scraper Windows - Clean
613C Series II Wheel Tractor-Scraper Reference Material
545 Wheel Skidder Power Train Service Brake - Remove and Install