963B Track-Type Loader Caterpillar


Burn Prevention

Usage:

963B 9BL

Coolant

At operating temperature, the engine coolant is hot and the engine coolant is under pressure. The radiator and all lines to heaters or to the engine contain hot coolant or steam. Any contact can cause severe burns.

Steam can cause personal injury.

Only check the coolant level after the engine has been stopped. Make sure that the radiator filler cap is cool. In order to remove the radiator cap with the bare hand, the radiator cap must be cool. In order to relieve pressure, remove the radiator filler cap slowly.

Cooling system conditioner contains alkali. Alkali can cause personal injury. Do not allow alkali to contact the skin, the eyes and the mouth.

Allow cooling system components to cool before draining.

Oils

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.

At operating temperature, the hydraulic tank is hot and the hydraulic tank can be under pressure.

Remove the hydraulic tank filler cap only after the engine has been stopped. The filler cap must be cool enough to touch.

Remove the hydraulic tank filler cap slowly in order to relieve pressure.

Relieve all the pressure in any system (air systems, oil systems, fuel systems, or cooling systems) before any system components are disconnected.

Batteries

Batteries give off flammable fumes which can explode.

Do not smoke when observing the battery electrolyte levels.

Electrolyte is an acid. Electrolyte can cause personal injury. Do not allow electrolyte to contact the skin or the eyes.

Always wear protective glasses when you work with batteries.

Caterpillar Information System:

D7R Track-Type TractorPower Train Track Roller - Remove
D7R Track-Type TractorPower Train Bottom Guard - Remove and Install
D9R Track-Type Tractor Equalizer Bar End Pins - Lubricate
D8R Track-Type Tractor Hydraulic System Filter (Steering)
D6R Track-Type Tractor Machine Systems Air Conditioner Dryer - Remove and Install
D7R Track-Type Tractor Machine Systems Refrigerant Evaporator Core and Heater Core - Remove and Install
D6R Track-Type Tractor Machine Systems Air Conditioner and Heater Fan Motor - Remove and Install
D7R Track-Type Tractor Machine Systems Instrument Panel - Remove and Install
D7R Track-Type Tractor Machine Systems Cab - Remove and Install
D7R Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
D7R Track-Type Tractor Machine Systems Hydraulic Control Valve - Install
973 Track-Type Loader Water Pump Belt - Inspect/Adjust/Replace
D7R Track-Type TractorPower Train Track Roller - Disassemble
973 Track-Type Loader Steering Linkage - Lubricate
D7R Track-Type TractorPower Train Track Roller - Assemble
D7R Track-Type TractorPower Train Track Roller - Install
D7R Track-Type TractorPower Train Track - Separate
D7R Track-Type TractorPower Train Track - Disassemble
D7R Track-Type TractorPower Train Track - Assemble
D7R Track-Type TractorPower Train Track - Connect
D7R Track-Type TractorPower Train Sprocket Segment - Remove and Install
611 Wheel Tractor-Scraper Cooling System Coolant (DEAC) - Change
D7R Track-Type TractorPower Train Track Roller Frame - Remove
D7R Track-Type TractorPower Train Pivot Shaft Seals-Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.