Track Roller - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Description     | Qty     |
A     | 183-4797     | Lifting Device     | 1     |
Start By:
- Loosen the track. See the procedure in Disassembly and Assembly, "Track - Separate" in this module.
- Raise one side of the machine. This side is the side with the track roller which requires disassembly.
- Use a hoist in order to position Tooling (A) under the track roller which requires disassembly.
Show/hide table
Illustration 1 | g00846627 |
- Remove bolts (2) from the caps that fasten the track roller to the track roller frame.
Note: A single flange roller weighs approximately 65 kg (140 lb). A double flange roller weighs approximately 70 kg (160 lb).
- Use Tooling (A) in order to remove track roller (1) from the track roller frame.
- Disassemble the Track Roller. Refer to Undercarriage Reconditioning Guide, SEBF8599.
Caterpillar Information System:
D7R Track-Type TractorPower Train Bottom Guard - Remove and Install
D9R Track-Type Tractor Equalizer Bar End Pins - Lubricate
D8R Track-Type Tractor Hydraulic System Filter (Steering)
D6R Track-Type Tractor Machine Systems Air Conditioner Dryer - Remove and Install
D7R Track-Type Tractor Machine Systems Refrigerant Evaporator Core and Heater Core - Remove and Install
D6R Track-Type Tractor Machine Systems Air Conditioner and Heater Fan Motor - Remove and Install
D7R Track-Type Tractor Machine Systems Instrument Panel - Remove and Install
D7R Track-Type Tractor Machine Systems Cab - Remove and Install
D7R Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
D7R Track-Type Tractor Machine Systems Hydraulic Control Valve - Install
973 Track-Type Loader Water Pump Belt - Inspect/Adjust/Replace
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Main Bearings - Install
963B Track-Type Loader Burn Prevention
D7R Track-Type TractorPower Train Track Roller - Disassemble
973 Track-Type Loader Steering Linkage - Lubricate
D7R Track-Type TractorPower Train Track Roller - Assemble
D7R Track-Type TractorPower Train Track Roller - Install
D7R Track-Type TractorPower Train Track - Separate
D7R Track-Type TractorPower Train Track - Disassemble
D7R Track-Type TractorPower Train Track - Assemble
D7R Track-Type TractorPower Train Track - Connect
D7R Track-Type TractorPower Train Sprocket Segment - Remove and Install
611 Wheel Tractor-Scraper Cooling System Coolant (DEAC) - Change
D7R Track-Type TractorPower Train Track Roller Frame - Remove