Air Conditioner and Heater Fan Motor - Remove and Install
Removal Procedure
- Remove bolts (1) from the bottom of the instrument panel. Pull instrument panel (2) upward. Pull out the instrument panel.
Show/hide table
Illustration 1 | g00613729 |
- Disconnect electrical connectors (4) .
Show/hide table
Illustration 2 | g00613747 |
- Disconnect electrical connectors (3) .
- Remove clip (5) .
Show/hide table
Illustration 3 | g00613771 |
- Remove screws from thermostat (6) .
- Remove bolts (7) with the washers that connect the blower to the bracket.
Show/hide table
Illustration 4 | g00613841 |
- Remove clip (8) from each motor.
Show/hide table
Illustration 5 | g00613851 |
- Disconnect electrical connector (9) from each motor.
- Remove nuts (10). Remove the fan motor.
Installation Procedure
- Install the fan motor. Install nuts (10) .
Show/hide table
Illustration 6 | g00613851 |
- Connect electrical connector (9) to each motor.
- Install clip (8) for each motor.
- Install bolts (7) with the washers that connect the blower to the bracket.
Show/hide table
Illustration 7 | g00613841 |
- Install screws to thermostat (6) .
Show/hide table
Illustration 8 | g00613771 |
- Install clip (5) .
- Connect electrical connectors (3) .
Show/hide table
Illustration 9 | g00613747 |
- Connect electrical connectors (4) .
- Push instrument panel (2) downward. Push in the instrument panel. Install bolts (1) to the bottom of the instrument panel.
Show/hide table
Illustration 10 | g00613729 |
Caterpillar Information System:
D7R Track-Type Tractor Machine Systems Instrument Panel - Remove and Install
D7R Track-Type Tractor Machine Systems Cab - Remove and Install
D7R Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
D7R Track-Type Tractor Machine Systems Hydraulic Control Valve - Install
973 Track-Type Loader Water Pump Belt - Inspect/Adjust/Replace
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Main Bearings - Install
824G , 825G and 826G Landfill Compactor Tip Control
824G , 825G and 826G Landfill Compactor Tilt Control
824G , 825G and 826G Landfill Compactor Lift Control
D7R Track-Type Tractor Machine Systems Governor Control Linkage and Decelerator - Assemble
D7R Track-Type Tractor Machine Systems Governor Control Linkage and Decelerator - Disassemble
D7R Track-Type Tractor Machine Systems Governor Control Linkage and Decelerator - Remove
D7R Track-Type Tractor Machine Systems Refrigerant Evaporator Core and Heater Core - Remove and Install
D6R Track-Type Tractor Machine Systems Air Conditioner Dryer - Remove and Install
D8R Track-Type Tractor Hydraulic System Filter (Steering)
D9R Track-Type Tractor Equalizer Bar End Pins - Lubricate
D7R Track-Type TractorPower Train Bottom Guard - Remove and Install
D7R Track-Type TractorPower Train Track Roller - Remove
963B Track-Type Loader Burn Prevention
D7R Track-Type TractorPower Train Track Roller - Disassemble
973 Track-Type Loader Steering Linkage - Lubricate
D7R Track-Type TractorPower Train Track Roller - Assemble
D7R Track-Type TractorPower Train Track Roller - Install
D7R Track-Type TractorPower Train Track - Separate