Torque Converter Priority Valve - Install
Installation Procedure
- Install priority valve (1) and four bolts (4) on the torque converter. The torque for bolts (4) is 102 ± 20 N·m (75 ± 15 lb ft).
Show/hide table
Illustration 1 | g00369252 |
- Connect two hose assemblies (2) to priority valve (1) .
Show/hide table
Illustration 2 | g00369213 |
- Fill the transmission to the correct level. For the correct procedure, refer to the Operation and Maintenance Manual for your machine.
- Start the engine and check for leaks.
End By: Install the power train guard. Refer to Disassembly and Assembly, "Power Train Guard (Transmission) - Remove and Install".
Caterpillar Information System:
3034 Engine for Caterpillar Built Machines Fuel Injection Pump
994D Wheel Loader Steering System Bypass Switch (Steering Pump Case Drain)
615C Series II Wheel Tractor-Scraper Engine Supplement Engine - Remove
854G Wheel Tractor and 992G Wheel Loader Power Train Service Brake - Assemble
854G Wheel Tractor and 992G Wheel Loader Power Train Service Brake - Disassemble
D11R Track-Type Tractor Engine Supplement Hydraulic Oil Cooler - Remove
3034 Engine for Caterpillar Built Machines Exhaust Manifold
854G Wheel Tractor and 992G Wheel Loader Power Train Torque Converter Priority Valve - Remove
3034 Engine for Caterpillar Built Machines Inlet Manifold
D6G Track-Type Tractor Power Train Final Drive - Remove
623F Wheel Tractor-Scraper Hydraulic System Relief Valve (Main)
902 and 906 Compact Wheel Loaders Side Dump Bucket Operation
D6G Track-Type Tractor Power Train Final Drive - Install
994D Wheel Loader Steering System Temperature Sensor (Steering)
D6G Track-Type Tractor Power Train Flywheel Clutch - Disassemble
623F Wheel Tractor-Scraper Hydraulic System Pressure Switch (Ejector, Floor)
D10R Track-Type Tractor Power Train Oil Cooler
D6G Track-Type Tractor Power Train Flywheel Clutch - Assemble
990 and 990 Series II Wheel Loader and 844 Wheel Tractor Power Train ROPS Mounting
854G Wheel Tractor and 992G Wheel Loader Power Train Torque Converter Priority Valve - Disassemble
623F Wheel Tractor-Scraper Hydraulic System Pilot Control Valve (Three Functions)
990 and 990 Series II Wheel Loader and 844 Wheel Tractor Power Train Cab Mounting
D6G Track-Type Tractor Power Train Flywheel Clutch - Remove
953C Track-Type Loader Power Train Front Idler and Recoil Spring