966G and 972G Wheel Loaders Caterpillar


Transmission Control - Command Control Steering

Usage:

972G 1EW


Illustration 1g00477132

The transmission direction control switch is located on the hand control that is attached to the steering wheel.

FORWARD (1) - Move the trigger switch to the left. The machine will move in forward.

NEUTRAL (2) - Move the trigger switch to the center position. The machine should not move.

REVERSE (3) - Move the trigger switch to the right. The machine will move in reverse.



Illustration 2g00698377

The selector switches for the transmission gear speed are located on the hand control that is attached to the steering wheel.

Push upshift switch (4) in order to shift the machine into the next highest gear.

Push downshift switch (5) in order to shift the machine into the next lowest gear.

1 - First Speed

2 - Second Speed

3 - Third Speed

4 - Fourth Speed



Illustration 3g00477135

The travel direction and the transmission gear speed will be displayed on the front dash.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.