Steering Metering Pump
Show/hide table
Illustration 1 | g00286350 |
Front view |
Show/hide table
Illustration 2 | g00286801 |
Schematic view |
Supply pressure for the steering metering pump. ... 2410 ± 105 kPa (350 ± 15 psi)
Show/hide table
Illustration 3 | g00286345 |
View A-A |
Show/hide table
Illustration 4 | g00286351 |
View B-B Bolt tightening sequence |
(1) Tighten the seven bolts in the sequence that is shown in Illustration 4 .
- Tighten the bolts to the following initial torque. ... 14 ± 3 N·m (125 ± 27 lb in)
- Tighten the bolts to the following final torque. ... 28 ± 3 N·m (250 ± 27 lb in)
Note: The bolts should not be lubricated.
Show/hide table
Illustration 5 | g00286352 |
View C-C Steering check valve |
(2) Tighten the plug to the following torque. ... 11 ± 1 N·m (100 ± 9 lb in)
Note: The plug must be flush with the mounting surface or below the mounting surface.
Show/hide table
Illustration 6 | g00286353 |
View D-D |
Align pin (4) in drive (5) with gerotor star (3) that is shown in illustration 6.
Caterpillar Information System:
953C Track-Type Loader Light Switches
966G and 972G Wheel Loaders Transmission Control - Command Control Steering
992G Wheel Loader Electrohydraulic System Pilot Control Actuator Current (Proportional Solenoid) - Check
611 Wheel Tractor-Scraper 3306B Engine Supplement Radiator - Remove
953C Track-Type Loader Window Wiper and Washer Control
953C Track-Type Loader Heating and Air Conditioning Controls - If Equipped
627F Wheel Tractor-Scraper Heating and Air Conditioning Control
631E Series II Wheel Tractor-Scrapers Backup Alarm
621F Wheel Tractor-Scraper Horn
953C Track-Type Loader Engine Start Switch
953C Track-Type Loader Air Inlet Heater Starting Aid
953C Track-Type Loader Backup Alarm
953C Track-Type Loader Monitoring System
953C Track-Type Loader Bucket Positioner
953C Track-Type Loader Tracks
966G and 972G Wheel Loaders Transmission Control - Conventional Steering
613C Series II Wheel Tractor 3116 Engine Supplement Radiator - Disassemble
3306B Industrial Engine Walk-Around Inspection
966G and 972G Wheel Loaders Autoshift Control - Earlier Machines
611 Wheel Tractor-Scraper 3306B Engine Supplement Fan and Fan Drive - Remove
613C Series II Wheel Tractor 3116 Engine Supplement Radiator - Assemble
966G and 972G Wheel Loaders Implement Lockout Control
994 Wheel Loader Hydraulic System Linkage Pin and Seal Group (Bucket Control)
953C Track-Type Loader Shipping the Machine