Engine Start Switch
Show/hide table
Illustration 1 | g00556377 |
Show/hide table
OFF - Inserting the engine start switch key and removing the key must only be done from the OFF position. In the OFF position, there is no power to most electrical circuits in the cab. The cab lights, the panel lights, the tail lights, and the dome light are operational even when the start switch is in the OFF position. |
Show/hide table
ON - Turn the start switch key clockwise to ON in order to activate all cab circuits. |
Show/hide table
START - Turn the start switch key clockwise to START in order to crank the engine. Release the key after the engine starts. The key will return to the ON position. |
Caterpillar Information System:
953C Track-Type Loader Air Inlet Heater Starting Aid
953C Track-Type Loader Backup Alarm
953C Track-Type Loader Steering Control
994 Wheel Loader Hydraulic System Linkage Pin and Seal Group (Bucket Control)
953C Track-Type Loader Speed Override and Brake Control
953C Track-Type Loader Ripper Control
613C Series II Wheel Tractor 3116 Engine Supplement Radiator - Remove
966G and 972G Wheel Loaders Transmission Neutralizer Override Control
953C Track-Type Loader Multipurpose Bucket Control
953C Track-Type Loader Seat Adjustment
953C Track-Type Loader Gauges
953C Track-Type Loader Diverter Valve Control
621F Wheel Tractor-Scraper Horn
631E Series II Wheel Tractor-Scrapers Backup Alarm
627F Wheel Tractor-Scraper Heating and Air Conditioning Control
953C Track-Type Loader Heating and Air Conditioning Controls - If Equipped
953C Track-Type Loader Window Wiper and Washer Control
611 Wheel Tractor-Scraper 3306B Engine Supplement Radiator - Remove
992G Wheel Loader Electrohydraulic System Pilot Control Actuator Current (Proportional Solenoid) - Check
966G and 972G Wheel Loaders Transmission Control - Command Control Steering
953C Track-Type Loader Light Switches
994 Wheel Loader Steering System Steering Metering Pump
953C Track-Type Loader Monitoring System
953C Track-Type Loader Bucket Positioner