Fuel Filter Base
Show/hide table
 | |
| Illustration 1 | g01524933 |
(1) Torque for stud ... 68 ± 7 N·m (50 ± 5 lb ft)
(A) Put 155-0695 Thread Lock Compound on the tapered end of the stud to the following distance. ... 7.6 ± 1.5 mm (0.30 ± 0.06 inch)
(B) Distance from the sealing surface of the filter base to the end of the stud ... 22.5 ± 0.5 mm (0.90± 0.02 inch)
(C) Sealing surface of the stud ... 12 ± 1 mm (0.47± 0.04 inch)
Note: Do not damage this surface.
Caterpillar Information System:
3406E, C-10 and C-12 On-highway Engines Electronic Service Tools
3126B Industrial Engines Engine Temperature Sensor Open or Short Circuit - Test
C11 and C13 Industrial Engines Speed/Timing Sensor
C7 Urban Transit Bus Engines Sensors and Electrical Components
C7 Urban Transit Bus Engines Fuel System Primary Filter - Replace
3126E and 3126B Commercial and Truck Engines Product Storage
3406E, C-10 and C-12 On-highway Engines Vehicle Speed Circuit - Calibrate
2004/08/01 Caterpillar Remanufactured Products Group Announces the Introduction of the Help Line Reference Tool {1000}
2004/07/01 Caterpillar Remanufactured Products Group Announces the Introduction of the Help Line Reference Tool {1000}
2004/07/26 Caterpillar Remanufactured Products Group Announces the Introduction of the Help Line Reference Tool {1000, 7000}
3406E, C-10 and C-12 On-highway Engines Engine Speed/Timing Sensor - Calibrate
C15 and C18 Industrial Engines Flywheel Housing
2004/06/21 Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
3126B Industrial Engines Injector Solenoid Circuit - Test
C9.3 Engine for Caterpillar Built Machines Connecting Rod
3408B and 3408C Industrial and Marine Engines Flywheel
C13, C15, and C18 Generator Set Engines Flywheel
C13, C15, and C18 Tier 4 Final Engines Flywheel
C15 and C18 Industrial Engines Flywheel
C9.3 Engine for Caterpillar Built Machines Piston and Rings
C15 Petroleum Generator Set Engines Engine Design
3408E and 3412E Engines for Caterpillar Built Machines Belt Tension Chart
3126B Industrial Engines Excessive White Smoke
3406E, C-10 and C-12 On-highway Engines 0091-13 Throttle Position out of calibration (28)