0091-13 Throttle Position out of calibration (28)
产生此代码的情况:
ECM 检测到下述情况时:
- 油门踏板位置传感器的占空比低于 5% 或占空比高于 95% 超过 2 秒。
- ECM 至少已通电三秒钟。
系统响应:
ECM 将 "Throttle Position(油门位置)"设定为 0%。 电子维修工具在"油门位置"状态旁显示"DIAG"。
该故障诊断代码为激活状态时,发动机会一直保持在低怠速下。
测试步骤 1. 进行以下的诊断步骤: 油门踏板(油门)位置传感器电路 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
3126B Industrial Engines Excessive White Smoke
3408E and 3412E Engines for Caterpillar Built Machines Belt Tension Chart
C15 Petroleum Generator Set Engines Engine Design
C9.3 Engine for Caterpillar Built Machines Piston and Rings
C15 and C18 Industrial Engines Flywheel
C13, C15, and C18 Tier 4 Final Engines Flywheel
C13, C15, and C18 Generator Set Engines Flywheel
3408B and 3408C Industrial and Marine Engines Flywheel
C9.3 Engine for Caterpillar Built Machines Connecting Rod
3126B Industrial Engines Injector Solenoid Circuit - Test
2004/06/21 Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
C9 Marine Engines and C9 Marine Generator Sets Fuel Filter Base
3126B Industrial Engines Low Power/Poor or No Response to Throttle
C15 and C18 Industrial Engines Turbocharger
2004/06/01 New Seal for the Front Housing {1151, 1207}
C15 and C18 Industrial Engines Turbocharger
3176C and 3196 Engines for Caterpillar Built Machines Speed/Timing Sensor
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Status Messages
G3516B Engines Inspecting Electrical Connectors
C15 and C18 Petroleum Engines General Information
C15 and C18 Industrial Engines Electronic Control System Components
C15 and C18 Industrial Engines Cooling System
3406E and 3456 Generator Set Engines Air Starting System
325D and 329D Excavators Stopping the Machine