Engine Design
Show/hide table
图 1 | g01096864 |
气缸和气门的位置 (A) 进气门 (B) 排气门 (C) 发动机飞轮端 |
缸径 ...
冲程 ...
排量 ...
气缸布置 ... 直列式
每气缸气门数 ... 4
以下数值是进气门间隙的调定值。 ...
以下数值是进气门间隙的调定值。 ...
发火次序(喷油顺序) ... 1、5、3、6、2、4
曲轴旋转 ... 逆时针
注: 发动机的前端与飞轮端相对。 发动机的左侧和右侧是指从飞轮端观看发动机时。 1 号气缸是最前端的气缸。
Caterpillar Information System:
C9.3 Engine for Caterpillar Built Machines Piston and Rings
C15 and C18 Industrial Engines Flywheel
C13, C15, and C18 Tier 4 Final Engines Flywheel
C13, C15, and C18 Generator Set Engines Flywheel
3408B and 3408C Industrial and Marine Engines Flywheel
C9.3 Engine for Caterpillar Built Machines Connecting Rod
3126B Industrial Engines Injector Solenoid Circuit - Test
2004/06/21 Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
C9 Marine Engines and C9 Marine Generator Sets Fuel Filter Base
3406E, C-10 and C-12 On-highway Engines Electronic Service Tools
3126B Industrial Engines Engine Temperature Sensor Open or Short Circuit - Test
C11 and C13 Industrial Engines Speed/Timing Sensor
3408E and 3412E Engines for Caterpillar Built Machines Belt Tension Chart
3126B Industrial Engines Excessive White Smoke
3406E, C-10 and C-12 On-highway Engines 0091-13 Throttle Position out of calibration (28)
3126B Industrial Engines Low Power/Poor or No Response to Throttle
C15 and C18 Industrial Engines Turbocharger
2004/06/01 New Seal for the Front Housing {1151, 1207}
C15 and C18 Industrial Engines Turbocharger
3176C and 3196 Engines for Caterpillar Built Machines Speed/Timing Sensor
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Status Messages
G3516B Engines Inspecting Electrical Connectors
C15 and C18 Petroleum Engines General Information
C15 and C18 Industrial Engines Electronic Control System Components