G3520C and G3520E Engines Caterpillar


Temperature Sensor

Usage:

G3520C B9P



图 1g01052447

(1) 传感器组件

扭矩 ... 20 ± 5 N·m (15 ± 4 lb ft)

(2) 带有 A 、B 、C 3 个插槽的插塞

工作温度 ... −40 至 120°C (−40 至 248°F)

供电电压 ... 4.75 至 8.5 伏

感知媒介
... 发动机冷却液、发动机机油、燃油、空气和液压油

Caterpillar Information System:

Electric Power Generation Principles Parallel Operation of Governors
3406E, C-10 and C-12 On-highway Engines Engine Cranks but Will Not Start
Electric Power Generation Principles Alternating Current Generator
C18 Marine Auxiliary Engines Injector Solenoid Circuit - Test
3406E, C-10 and C-12 On-highway Engines Cruise Control, Idle, or PTO Can Not Be Set
Electric Power Generation Principles Governor
C-10 and C-15 Petroleum Engines System Configuration Parameters
Electric Power Generation Principles General Information
3406E, C-10 and C-12 On-highway Engines Cooling Fan Is Always ON
C15 Petroleum Engines Air Compressor - Remove and Install
SCJ and 8SC Series Alternators Alternator - Disassemble
2004/04/01 223-9296 Alternators are Being Replaced. {1405}
2004/03/01 New Special Instruction, REHS1708, "Installation of the Advanced Digital Engine Management (ADEM) III on G3606 and G3608 Engines" Is Available {1901}
2004/03/01 Revised Special Instruction, REHS0147, "Installation Of The Hydraulic Actuator System (Hydrax System) on G3606 and G3608 Engines" Is Available {1901}
C-15 Petroleum Engine Turbocharger - Remove
C-15 Petroleum Engine Turbocharger - Install
Electric Power Generation Principles Parallel Operation of Generators
Electric Power Generation Principles Load Transfer
Electric Power Generation Principles Switchgear Instrumentation
Electric Power Generation Principles Power Factor
3406E, C-10 and C-12 On-highway Engines Engine Misfires, Runs Rough or Is Unstable
C-15 Petroleum Engine Exhaust Manifold - Remove and Install
Electric Power Generation Principles Voltage Control
3126B Petroleum Engine Safety Messages
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.