Fuel Filter Base - Assemble
Assembly Procedure
Show/hide table
Illustration 1 | g00994622 |
- Install gasket (8) and fuel filter (7) into filter assembly (9) .
- Install gasket (6) and O-ring seal (5) onto filter (7) .
- Position the fuel filter on base assembly (1) and install washer (3), O-ring seal (2), and bolt (4) .
Caterpillar Information System:
G3304 and G3306 Engines Auxiliary Water Pump - Install
3054E and 3056E Industrial Engines Alternator and Fan Belts - Inspect/Adjust/Replace
XQ125 Generator Set Battery Electrolyte Level - Check
3046 Engine for Caterpillar Built Machines Fuel Injection Timing - Check - Distributor Pump
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Disassemble
3500B and 3500C Marine Propulsion Engines Customer Parameters Worksheet
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Remove
G3304 and G3306 Engines Auxiliary Water Pump - Remove
C1.5 and C2.2 Generator Set Engines Crankshaft Main Bearings - Install
C1.5 and C2.2 Generator Set Engines Glow Plugs - Remove and Install
3046 Engine for Caterpillar Built Machines Fuel System - Prime - Distributor Pump
C15 and C18 Petroleum Generator Sets Walk-Around Inspection
3500 Marine Engines Accumulator
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Install
3500 Marine Engines Accumulator
C1.5 and C2.2 Marine Generator Set Engines Fuel Transfer Pump - Install
3500B and 3500C Marine Propulsion Engines Replacing the ECM
G3304 and G3306 Engines Auxiliary Water Pump - Disassemble
3046 Engine for Caterpillar Built Machines Glow Plugs - Test
3516B Generator Set Engines with Dynamic Gas Blending Factory Passwords
C1.5 and C2.2 Marine Generator Set Engines Fuel Transfer Pump - Remove
Caterpillar On-Highway Diesel Engine Fluids Recommendations Reference Material
3500B and 3500C Marine Propulsion Engines Event Codes