Fuel Control Valve - Remove and Install
拆卸步骤
开始:
- 拆下油门控制阀。 请参阅拆解和组装油门, "控制阀 - 拆卸"。
- 断开管组件 (1) 和管组件 (2) 。
Show/hide table
 | |
| 图 1 | g00994601 |
- 从燃油控制阀 (4) 上断开线束组件 (3) 。
Show/hide table
 | |
| 图 2 | g00994602 |
- 将适当的起吊设备连接到燃油控制阀 (4) 上。
Show/hide table
 | |
| 图 3 | g00994603 |
Show/hide table
 | |
| 图 4 | g00994604 |
- 卸下螺栓 (5) 。
- 拆卸燃油控制阀 (4) 和板 (7) 。 燃油控制阀和板的重量约为 82 kg (180 lb)。
- 将燃油控制阀 (4) 定位在垫块上。
- 重新定位适当的起吊设备。
- 拆下螺栓 (6) 。
- 从板 (7) 上拆下燃油控制阀 (4) 。 燃油控制阀的重量约为 45 kg (100 lb)。
安装步骤
- 将适当的起吊设备连接到燃油控制阀 (4) 上。
Show/hide table
| | |
| 图 5 | g00994604 |
Show/hide table
| | |
| 图 6 | g00994603 |
- 将燃油控制阀 (4) 定位在板 (7) 上。 燃油控制阀的重量约为 45 kg (100 lb)。
- 安装螺栓 (6) 。
- 将适当的起吊设备连接到燃油控制阀 (4) 上。
- 定位燃油控制阀 (4) 和板 (7) 。 燃油控制阀和板的重量约为 82 kg (180 lb)。
- 安装螺栓 (5) 。
- 将管组件 (3) 连接到主控制阀 (4) 上。
Show/hide table
| | |
| 图 7 | g00994602 |
- 安装线束组件 (1) 和管组件 (2) 。
Show/hide table
| | |
| 图 8 | g00994601 |
End By: 安装油门控制阀。 请参考 拆解和组装, "油门控制阀 - 安装"。
Caterpillar Information System:
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Remove
G3304 and G3306 Engines Auxiliary Water Pump - Remove
C1.5 and C2.2 Generator Set Engines Crankshaft Main Bearings - Install
C1.5 and C2.2 Generator Set Engines Glow Plugs - Remove and Install
3046 Engine for Caterpillar Built Machines Fuel System - Prime - Distributor Pump
C1.5 and C2.2 Marine Generator Set Engines Engine Oil Pressure Switch - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Nozzle - Test
C1.5 and C2.2 Marine Generator Set Engines Coolant Temperature Switch - Remove and Install
Caterpillar On-Highway Diesel Engine Fluids Recommendations Coolant Recommendations
C1.5 and C2.2 Generator Set Engines Crankshaft - Install
C1.5 and C2.2 Generator Set Engines Crankshaft Main Bearings - Remove
C1.5 and C2.2 Marine Generator Set Engines Pistons and Connecting Rods - Install
3500B and 3500C Marine Propulsion Engines Customer Parameters Worksheet
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Disassemble
3046 Engine for Caterpillar Built Machines Fuel Injection Timing - Check - Distributor Pump
XQ125 Generator Set Battery Electrolyte Level - Check
3054E and 3056E Industrial Engines Alternator and Fan Belts - Inspect/Adjust/Replace
G3304 and G3306 Engines Auxiliary Water Pump - Install
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Assemble
C15 and C18 Petroleum Generator Sets Walk-Around Inspection
3500 Marine Engines Accumulator
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Install
3500 Marine Engines Accumulator
C1.5 and C2.2 Marine Generator Set Engines Fuel Transfer Pump - Install