Fuel Transfer Pump - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
Illustration 1 | g01037401 |
- Install the gasket to fuel transfer pump (4) . Position fuel transfer pump (4) on the block.
- Install bolts (3) and the washers.
- Install hose assembly (1) and hose assembly (2) .
Caterpillar Information System:
3500 Marine Engines Accumulator
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Install
3500 Marine Engines Accumulator
C15 and C18 Petroleum Generator Sets Walk-Around Inspection
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Assemble
G3304 and G3306 Engines Auxiliary Water Pump - Install
3054E and 3056E Industrial Engines Alternator and Fan Belts - Inspect/Adjust/Replace
XQ125 Generator Set Battery Electrolyte Level - Check
3046 Engine for Caterpillar Built Machines Fuel Injection Timing - Check - Distributor Pump
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Disassemble
3500B and 3500C Marine Propulsion Engines Customer Parameters Worksheet
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
3500B and 3500C Marine Propulsion Engines Replacing the ECM
G3304 and G3306 Engines Auxiliary Water Pump - Disassemble
3046 Engine for Caterpillar Built Machines Glow Plugs - Test
3516B Generator Set Engines with Dynamic Gas Blending Factory Passwords
C1.5 and C2.2 Marine Generator Set Engines Fuel Transfer Pump - Remove
Caterpillar On-Highway Diesel Engine Fluids Recommendations Reference Material
3500B and 3500C Marine Propulsion Engines Event Codes
3500B and 3500C Marine Propulsion Engines E021 High Exhaust Temperature Derate
C1.5 and C2.2 Generator Set Engines Engine Speed Actuator - Remove and Install
3500B Series II Marine Engines E040 Low Engine Oil Pressure Shutdown
3500B Series II Marine Engines E100 Low Engine Oil Pressure Warning
C1.5 and C2.2 Marine Generator Set Engines Auxiliary Water Pump - Remove