Auxiliary Water Pump - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Close the drain valve for the sea water circuit.
- Disconnect hose (4) from auxiliary water pump (3). Remove elbow assembly (5) (if applicable).
Show/hide table
Illustration 1 | g01037321 |
- Plug and cap all openings. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
- Remove bolts (1), nuts (2), and the washers. Remove auxiliary water pump (3) from the front housing.
Caterpillar Information System:
3500B Series II Marine Engines E100 Low Engine Oil Pressure Warning
3500B Series II Marine Engines E040 Low Engine Oil Pressure Shutdown
C1.5 and C2.2 Generator Set Engines Engine Speed Actuator - Remove and Install
3500B and 3500C Marine Propulsion Engines E021 High Exhaust Temperature Derate
3500B and 3500C Marine Propulsion Engines Event Codes
Caterpillar On-Highway Diesel Engine Fluids Recommendations Reference Material
C1.5 and C2.2 Marine Generator Set Engines Fuel Transfer Pump - Remove
3516B Generator Set Engines with Dynamic Gas Blending Factory Passwords
3046 Engine for Caterpillar Built Machines Glow Plugs - Test
G3304 and G3306 Engines Auxiliary Water Pump - Disassemble
3500B and 3500C Marine Propulsion Engines Replacing the ECM
C1.5 and C2.2 Marine Generator Set Engines Fuel Transfer Pump - Install
C1.5 and C2.2 Marine Generator Set Engines Auxiliary Water Pump - Disassemble
3500B and 3500C Marine Propulsion Engines E095 Fuel Filter Restriction Warning
C1.5 and C2.2 Marine Generator Set Engines Auxiliary Water Pump - Assemble
3406E and 3456 Generator Set Engines E173 High Exhaust Temperature Warning
3500B and 3500C Marine Propulsion Engines E279 High Aftercooler Temperature Warning
C1.5 and C2.2 Marine Generator Set Engines Auxiliary Water Pump - Install
C1.5 and C2.2 Marine Generator Set Engines Heat Exchanger - Assemble
C1.5 and C2.2 Marine Generator Set Engines Heat Exchanger - Remove
G3520B Industrial Engine Ignition Transformers Secondary Circuit and Spark Plugs
C1.5 and C2.2 Marine Generator Set Engines Heat Exchanger - Disassemble
C1.5 and C2.2 Generator Generator - Remove
C1.5 and C2.2 Marine Generator Set Engines Heat Exchanger - Install