Fuel Transfer Pump - Remove
Removal Procedure
Show/hide table
 | |
| Illustration 1 | g01037401 |
- Remove hose assembly (1) and hose assembly (2) .
- Plug and cap all openings. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
- Remove bolts (3) and the washers. Remove fuel transfer pump (4) and the gasket.
Caterpillar Information System:
3516B Generator Set Engines with Dynamic Gas Blending Factory Passwords
3046 Engine for Caterpillar Built Machines Glow Plugs - Test
G3304 and G3306 Engines Auxiliary Water Pump - Disassemble
3500B and 3500C Marine Propulsion Engines Replacing the ECM
C1.5 and C2.2 Marine Generator Set Engines Fuel Transfer Pump - Install
3500 Marine Engines Accumulator
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Install
3500 Marine Engines Accumulator
C15 and C18 Petroleum Generator Sets Walk-Around Inspection
C1.5 and C2.2 Generator Set Engines Fuel Filter Base - Assemble
G3304 and G3306 Engines Auxiliary Water Pump - Install
3054E and 3056E Industrial Engines Alternator and Fan Belts - Inspect/Adjust/Replace
Caterpillar On-Highway Diesel Engine Fluids Recommendations Reference Material
3500B and 3500C Marine Propulsion Engines Event Codes
3500B and 3500C Marine Propulsion Engines E021 High Exhaust Temperature Derate
C1.5 and C2.2 Generator Set Engines Engine Speed Actuator - Remove and Install
3500B Series II Marine Engines E040 Low Engine Oil Pressure Shutdown
3500B Series II Marine Engines E100 Low Engine Oil Pressure Warning
C1.5 and C2.2 Marine Generator Set Engines Auxiliary Water Pump - Remove
C1.5 and C2.2 Marine Generator Set Engines Auxiliary Water Pump - Disassemble
3500B and 3500C Marine Propulsion Engines E095 Fuel Filter Restriction Warning
C1.5 and C2.2 Marine Generator Set Engines Auxiliary Water Pump - Assemble
3406E and 3456 Generator Set Engines E173 High Exhaust Temperature Warning
3500B and 3500C Marine Propulsion Engines E279 High Aftercooler Temperature Warning