Engine Oil Filter Base - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 185-3630     | Strap Wrench Assembly     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove oil filter (4) with Tooling (A) .
Show/hide table
Illustration 1 | g01002547 |
- Disconnect tube assembly (2) .
- Remove bolts (3) that hold engine oil filter base (1) to the cylinder block. Remove engine oil filter base (1) .
Caterpillar Information System:
3516B HD Generator Set Overhaul (Top End)
3126B Petroleum Engine Excessive White Smoke
G3304 and G3306 Engines Vibration Damper and Pulley - Remove
3516B HD Generator Set Overhaul (Major)
C9 Urban Transit Bus Engine Air Inlet Cover - Install
C9 Urban Transit Bus Engine Air Inlet Cover - Remove
C1.5 and C2.2 Generator General Information
G3304 and G3306 Engines Engine Oil Cooler - Assemble
C7 On-Highway Engine Lifter Group - Remove and Install
C15 Petroleum Generator Set Engines Gear Group (Front)
C7 Engines for Caterpillar Built Machines Unit Injector - Install
C7 Engines for Caterpillar Built Machines Unit Injector - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Glow Plugs
3044C Industrial Engine After Stopping Engine
3044C Industrial Engine Cooling System Coolant (DEAC) - Change
C15 On-Highway Engines Lubrication System
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
G3304 and G3306 Engines Vibration Damper and Pulley - Install
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
G3304 and G3306 Engines Crankshaft Front Seal and Wear Sleeve - Remove
C7 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove
3044C Industrial Engine Engine Oil and Filter - Change
C7 On-highway Engine Connecting Rod Bearings - Install
C7 Engines for Combat and Tactical Vehicles System Overview